|
Pintle mounted mast crutch cross with Trailer lights
Hi All, to prevent "drowning" the trailer lights & wiring at every outing, whenever I get a "new" sailboat, I make a rudder pintle Mast crutch "cross" for it. If the boat came with a crutch, then I at
Hi All, to prevent "drowning" the trailer lights & wiring at every outing, whenever I get a "new" sailboat, I make a rudder pintle Mast crutch "cross" for it. If the boat came with a crutch, then I at
|
By
Alternativefueler
·
|
|
Pintle mounted mast crutch 12 messages
Hi everybody, I am looking for the (hopefully) factory made, pintle-mounted mast crutch, if anyone would sell one to me. Thanks!
Hi everybody, I am looking for the (hopefully) factory made, pintle-mounted mast crutch, if anyone would sell one to me. Thanks!
|
By
sealyham01@...
·
|
|
Small Craft Advisor Mini-Cruiser Madness Matchup 2 messages
Small Craft Advisor Magazine is conducting a poll/match up regarding the best small mini-cruiser. The West Wight Potter 15' made it into the second round but is now facing a formidable opponent in the
Small Craft Advisor Magazine is conducting a poll/match up regarding the best small mini-cruiser. The West Wight Potter 15' made it into the second round but is now facing a formidable opponent in the
|
By
Shawn Payment
·
|
|
pipe thread help 13 messages
I have a pipe with an internal thread 1.426 inches or 36.2204mm diameter threads 114 per inch or 2.8956mm I want to connect it to a standard American pipe 1.25 inches in diameter with coarse thread. I
I have a pipe with an internal thread 1.426 inches or 36.2204mm diameter threads 114 per inch or 2.8956mm I want to connect it to a standard American pipe 1.25 inches in diameter with coarse thread. I
|
By
Thomas Bodine
·
|
|
For Sale Pristine 2004 WWP19
Meticulously setup and maintained bluewater layup/premium package, outboard, sails and trailer. New color coded running rigging, set up for short handed sailing, upgraded electrical system, new barrie
Meticulously setup and maintained bluewater layup/premium package, outboard, sails and trailer. New color coded running rigging, set up for short handed sailing, upgraded electrical system, new barrie
|
By
Peter_D
·
|
|
4 changes that made WWP15 point 10degrees higher
At ~60 lbs a 4hp 4 stroke long shaft is definitely too heavy for the WWP 15. Add a 3 gallon tank and my own svelte figure wrangling the two at the stern and it's just not pretty at all. The extra weig
At ~60 lbs a 4hp 4 stroke long shaft is definitely too heavy for the WWP 15. Add a 3 gallon tank and my own svelte figure wrangling the two at the stern and it's just not pretty at all. The extra weig
|
By
John B Dougherty
·
|
|
For Sale 5 messages
#wwp15
“Blue Potter” is a 2002 WWP15 in suberb condition. She has the blue water layup, brand new custom sails, all new rigging, working running lights with new electric panel, sail cover, jib bag, spinnaker
“Blue Potter” is a 2002 WWP15 in suberb condition. She has the blue water layup, brand new custom sails, all new rigging, working running lights with new electric panel, sail cover, jib bag, spinnaker
|
By
sealyham01@...
·
|
|
4 changes that made WWP15 point 10degrees higher 3 messages
Before selling "Titmouse", my Potter 15 Mk1 this past week to a nice gentleman up in Nebraska, my children and I decided to make some memories, stretching her wings a bit on Father's Day. I got the bo
Before selling "Titmouse", my Potter 15 Mk1 this past week to a nice gentleman up in Nebraska, my children and I decided to make some memories, stretching her wings a bit on Father's Day. I got the bo
|
By
Alternativefueler
·
|
|
Paperwork done, "Par le vent" will be for sale soon.
I am currently over-boated (3), so I am regretfully putting Par le vent up for sale. The boat is a 2001 WWP-19, with a trailer and outboard, hull number 1268. I have had her for 3 seasons, but last ye
I am currently over-boated (3), so I am regretfully putting Par le vent up for sale. The boat is a 2001 WWP-19, with a trailer and outboard, hull number 1268. I have had her for 3 seasons, but last ye
|
By
Amgine
·
|
|
1981 WWP15 for sale stalled due to paperwork 2 messages
Paperwork from State DMV took months to return complete, hence my relisting again.
Paperwork from State DMV took months to return complete, hence my relisting again.
|
By
Alternativefueler
·
|
|
Solar Panel 6 messages
Where is the best place to mount a solar panel on a P19?
Where is the best place to mount a solar panel on a P19?
|
By
GRW2
·
|
|
1981 WWP 15 +trailer +OB for sale 3k
Hello Potter Trotters, I am giving any member in the group, advance chance of acquiring my yellow, mighty lite trailer sailer. Bound for a new steward for 3000. (Sailboats are like cats, we don't own
Hello Potter Trotters, I am giving any member in the group, advance chance of acquiring my yellow, mighty lite trailer sailer. Bound for a new steward for 3000. (Sailboats are like cats, we don't own
|
By
Alternativefueler
·
|
|
Tohatsu 6 HP Sail Pro long shaft 5 messages
Does anyone know: The best motor oil to use? The best oil for the lower assembly? Any tips for changing either type of oil? Thanks, Ted
Does anyone know: The best motor oil to use? The best oil for the lower assembly? Any tips for changing either type of oil? Thanks, Ted
|
By
earons@...
·
|
|
WWP 19 Keel Winch. Electric hooked to manual winch 2 messages
Bob, you got me thinking...I think like Amgine in that less elec powered necessities on a boat are better, so I came up with a folding pedal bicycle rig that turns the small handled Keel crank from th
Bob, you got me thinking...I think like Amgine in that less elec powered necessities on a boat are better, so I came up with a folding pedal bicycle rig that turns the small handled Keel crank from th
|
By
Alternativefueler
·
|
|
WWP 19 Keel Winch. Electric 3 messages
Anyone ever consider or add an electric winch to the keel lifting process. The location of the winch is so difficult to deal with I just want to connect the dyneema to an electric system and locate it
Anyone ever consider or add an electric winch to the keel lifting process. The location of the winch is so difficult to deal with I just want to connect the dyneema to an electric system and locate it
|
By
Bob Lewis
·
|
|
I had a tree fall on my boat (Potter 15) 5 messages
Need a new mast and all new rigging, where should I buy? Thank you Giorgio
Need a new mast and all new rigging, where should I buy? Thank you Giorgio
|
By
giorgiosci
·
|
|
Bimini for Potter 15? 3 messages
Wondering if anyone has the vendor and size/product # to order for the whole Bimini/canvas that will fit a West Wight Potter right? Thanks alot! -Tom Hill, Southern Pines, NC
Wondering if anyone has the vendor and size/product # to order for the whole Bimini/canvas that will fit a West Wight Potter right? Thanks alot! -Tom Hill, Southern Pines, NC
|
By
Tom Hill
·
|
|
1981 15’ Potter for $2950 3 messages
I have one for sale for 2950 in KCMO midwest area. I will list it on the site today thanks, Mike On Monday, March 21, 2022, 06:01:56 PM CDT, Danny Horne <danny.horne@...> wrote: Just saw a listing on
I have one for sale for 2950 in KCMO midwest area. I will list it on the site today thanks, Mike On Monday, March 21, 2022, 06:01:56 PM CDT, Danny Horne <danny.horne@...> wrote: Just saw a listing on
|
By
Alternativefueler
·
|
|
stern light/lens 2 messages
I need to replace the lens and top (black) cover on my P-15's stern light.. Is there a source to replace even the entire light? I've been using this in a pinch but it's awkward to axxix it as it does
I need to replace the lens and top (black) cover on my P-15's stern light.. Is there a source to replace even the entire light? I've been using this in a pinch but it's awkward to axxix it as it does
|
By
Jeff Anzevino
·
|
|
Possible shroud replacement 10 messages
Looking for opinions: Last seasone, I tuned my 1997 P’19 shrouds and mast following Judy B’s guidelines. When I got the mast centered beam-to-beam and raked backward a few inches, the upper-shroud tur
Looking for opinions: Last seasone, I tuned my 1997 P’19 shrouds and mast following Judy B’s guidelines. When I got the mast centered beam-to-beam and raked backward a few inches, the upper-shroud tur
|
By
earons@...
·
|