Well I didn't intend that message to go to the whole group. I stand by what I said however. I apologize if I hurt someone's feelings. Let's not turn this into a tit-for-tat message barrage. A reminder

We ll that got missent....oops.... I stand by by comments

I agree that TP is over the top, in so many ways. He has but one motivation, be #1... no other use. I use it for propagation determinations I differ with Rob's opinion that Tom helps I spent many many

I have just checked in an enhancement which by default adds .1 Hz to the spot frequencies uploaded to wsprnet and wsprdaemon. That addition corrects the spot frequency error introduced by the differen

Hello, My wsprdaemon installation (OE3XOE) stopped the upload to wsprnet yesterday at 14:50 UTC. Could not find any reason for that. I am running the wsprdaemon on a i5 and I am using a flydog-sdr. th

In the last few hours I have been checking in WD code which protects it against some error conditions I encountered at KFS which had stimulated a 100% CPU usage condition. That error state was produce

I have started work on an enhancement to WD 3.0 which will increase the resolution of FST4W reports to .1 Hz and SNRs to .1 dB. At the moment I see no FST4W transmissions within easy reception range o

I am about to retire a Pixel 3 Android smartphone. As I understand it, it should be possible to install the Linux operating system on an old Android smartphone like this....which leads to my question.

I was reading the QRP-Labs QDX operating manual today and found these two WSPR frequency reporting URLs. RX +- 1 is normal for the current software version & GPS. Https://qrp-labs.com/images/wsprnet/r

Installation per greenfield is not restarting after reboot. I also found that the extended alias commands didn't stick, they are gone after reboot as well. This is what I get when starting wsprdaemon

hni This screenshot is from 11:09 utc on the north west LPDA The S-meter is from a Japanese station (JM7OLW) always putting a big signal to California on 40m...on don However the signal at kph on the

source ~/wsprdaemon/.wd_bash_aliases rci -- Rob Robinett AI6VN rob@... mobile: +1 650 218 8896

I have sdr_hw=KiwiSDR v1.557; this morning I checked the availability of new software via the admin console. It showed a new version 1.559 and after that directly -- without my intervention -- started

Rob, when I Putty direct to a KIWI what is the ID and PW? I am trying to het second KIWI to move from ver 548 to 559. John TI4JWC

I am noticing this error on my i7 server. Has anyone seen this? 73 Steve KD2OM

John Seamons issued a fix in v1.557 for the absence of GPS frequency corrections when there were no browser connections. The problem was outlined in post https://groups.io/g/wsprdaemon/topic/kiwisdr_g

On wspr live we find the helpful overview of FST4 spots. With a qualifier for the number of false decodes. How are these found ? I think HB9TMXC is an active low bands radio amateur, G6AVK is active o

Thanks for all the answers... I will look into ordering the necessary parts then to move on... I also need to find a way to get a connection from the GPS antenna through the concrete to the basement,

The False Decode trap/filter seems to be running well on my 8088 page. Its adaptive whitelist scheme is effective and my daily audit has noticed only bout 1 escape a day, literally. It is applied to a

nHello, Is there any modification advice document how to connect the Leo Bodnar GPSDO to the Kiwisdr ? From a rough study of the kiwi design document, it seems the PCB is providing a connection point