I have just a RTL-SDR dogle. I I tune it to 2200m band with following setting: "00:00 SDR_0,2200,W2" and it tunes to 648000 Hz -------------------------------------- Found 1 device(s): 0: Realtek, RTL

Come great spot counts!..... 5M has been exceeded, and WD has been a big part of pushing those totals up 01 January 3351052 02 January 3222763 03 January 3189064 04 January 3577334 05 January 3642871

The RX888 has potential as a Kiwi replacement. I have had one for some time for use with SDRconsole. It can be very CPU intensive if you try to use the full 32 MHz BW. However at it current sell price

Good things come to those who wait! This must be the catchphrase for RFzero v.2.0. I now have RFzeros available again that among other things can be used as a GPS controlled stand alone FST4W transmit

As part of confirming everything prior to sending off Reference boards for QDX systems I've discovered a serious problem. In a nutshell I think it is possible to blow out the QDX finals if external cl

I see this on all 4 of my APi systems zkd@WA2ZKD-wspr-C:~/wsprdaemon$ /home/zkd/wsprdaemon/decoding.sh: line 758: raw_file_list: bad array subscript /home/zkd/wsprdaemon/decoding.sh: line 763: raw_fil

Yesterday Gary W1GJM posted to the WN forum that the wsprnet.org DB had been changed to better describe the different wpsr pkt modes. However I am a little confused by his description. - Modes to DB C

what if anything needs to be done on WD sites or sites that scrape form wsprdaemon.org given the changes announced on wsprnet concerning mode mapping

I was told that this SBC might be similar to a Pi3 in performance.... https://www.inovato.com/product/inovato-quadra Curious if anyone has tried one of these for wsprdaemon, or based on the specs are

Greetings y'all For a long time the Kiwis have now been unavailable and the few that had them put a price tag that would make it a better deal to just buy a box of Air Spy HF. I definitely would like

For the many in the group who do not follow the QDX on the QRP labs forum I though I should update with some very good news. Hans Summer, QRPLabs and QDX author has released some new beta code for the

Dear Rob, many thanks for all your work and joy, I experience with you great wsprdaemon software... Attached is my X-mas gift card.... ;-) Ulli, ON5KQ

If you have questions about WD or its use, I host a weekly Google Meeting to which everyone is welcome. Click here to join: https://meet.google.com/xtg-cwgy-vus Tomorrow I will report about newly impl

FYI ---------- Forwarded message --------- From: Joe Taylor via wsjt-devel <wsjt-devel@...> Date: Sat, Dec 17, 2022 at 6:54 AM Subject: [wsjt-devel] WSJT Home Page is temporarily unavailable To: WSJT

There is no new functionality, so there is no need for most stations to 'git pull' But 'git clone' should give you 3.0.6 which runs on the older OSes. However, if you are installing on Pi bullieye or

Here's a song about the WSPR mode written by the online AI chat bot at openai.com. All I asked it to do was "write a song about the magic of WSPR mode" Now all we need are the notes and chords to go w

This week I plan to use this system to probe the RF distribution system at KFS to find out where the NW antenna signal is losing 20+ dB of RF signal strength. But more generally ,this setup is useful

Hi Bryan, These charts compare 20M spot frequencies of your Bodnar + Kiwi_0 with the same spots recorded by the Bodnar-driver KFS Omni_C Bodnar + Kiwi, and with the internal GPS-aided KFS Omni_A Kiwi.

Hi guys. Simplified advanced text can now be included in http://wspr.rocks/wdprop/ which allows visualising a single band such as 10m to get a better idea of past and current propagation trends. For a

My remote spotter site in MI went offline yesterday, the day after I departed the area, after months of no major glitches - of course! I am also no longer able to access the Pi4 via ssh or VNC. The AD