I've been pondering ways to add some CPU power to my existing Pi4 setup. It occurs to me that with the current prices for a new Pi4, other alternatives such as a refurbished PC, or non-Pi SBCs are via

past 12 hours fst4w 40m mode = 5 from San Jose, CA 4 watts big sky loop --------- past 12 hours wspr 40m mode = 2 from San Jose, CA 200 milliwatts small sky loop ----------- past 12 hours wspr 80 to 6

Can you display the WSPR Rocks global point to point map for a specific mode type? Use case: As a researcher, I would like a drop down menu to pick/select All sub modes types (2, 5, etc.) or individua

Rob, Is this the error that never recovers? Found 12 new 'ERROR:' lines in /dev/shm/wsprdaemon/recording.d/BE/630/decoding_daemon.log among its 3325 new log lines. Tue 12 Jul 2022 04:40:02 UTC: get_wa

> Crunching the wsprnet data shows that the active systems typically are > as follows: 41 TX and 82 RX > > Active status is derived the logged data from reporters > > Systems exceed stations as each s

My Pi4 (recently upgraded to WD3) was running well until I accidentally shut the power off, and after it restarted it no longer connects to my two Kiwis. I've tried manually restarting using ./wsprdae

The new machine at W3ENR is up and running. Falling back to Ubuntu 20 did the trick and wsprdaemon installed smoothly. It seems like there are a diversity of solutions to the CPU demands of FST4W. I'm

(With an embarrassed grin) I just had a stroke of luck and was able to pick up a 3rd Kiwi very affordably. Assuming it checks out on arrival, how to use it? My present station is pretty simple. A sing

Thanks to Tom WA2TP I have been running an experiment which compares two sets of 20M signals from the same 5 Kiwis at his site. WA2TP is Tom's production i9 server running WD 3.0.3.1 configured to dec

I decided to pull the trigger on getting a second KiwiSDR after coming across an excellent deal from a well known UK amateur radio vendor. The total kit price came to around $240 USD including shippin

I will begin providing a nonstop tx FST4W beacon service to this community to crack the chicken / egg dilemma. Rob can let me know which frequency he wants me to tx beacon on this thread, and then I w

I find the code to mode to WSPR/FST4W-xxx correlations confusing and where they are used equally confusing. It is my understanding that 'code' is a four bit field found in the last field of each spot

All, Sorry for asking but tried a few combinations of commands, only used to using a pi for Wsprdaemon install. Can somebody give me the command list to install it on ubuntu-22.04-desktop-amd64 versio

Hi Stu, I have cc'd the forum because this will be an ongoing issue as we experiment with FST4W. In another thread I have tried to explain why WD will not decode 1/2 of the transmissions of Glenn's N6

Hi Folks - My i5-9500 arrived but I've hit a snag on the greenfields install. Everything seems to have installed correctly except qt5-default:amd64. The error I get is that is "has no installation can

I have downloaded the program from GitHub and followed the instructions (READ.ME) for a greenfield site install. I have a NUC i3 running Mint 20.2. Following faithfully the instruction to create a new

Rod, I could not run All modes for 20m--80m. I removed the additional mode on 30 & 40m and now running well.. I went to edit /etc/fstab but only found fstab.save file. No rush, could you edit system x

I haven't been closely following the WD3 version story here, and approach any kind of upgrade involving Linux commands with great trepidation, admittedly due to my lack of experience in that area. I c

All, Great stuff with wsprdaemon working of FST4W and other sources so UDL is upgrading continuing the obsession of multiple RX. Ordering a Ryzen 7 mini pc to use on LInux and use for wsprdaemon, as a

Is currently off due to house remodel system replacement software rework I hope to have it working again in a few days -Jim