Hi John, Yours is a common question, so I'm including the WD group in my response. There are some stations in the UK which transmit in two 60M channels at the same time. WD treats the 60Mand 60eu band

Geoff Fox 0fl15h1usia2tco6164 · Hi all. I'm K1GF, but writing in my capacity as science reporter for Newsy. I'd like to do a story about WSPR, the absolute opposite of broadband. I'm curious if any of

.....seeking feedback on this idea from a broad audience! In a month or so I'd like to give a talk to a group here in Arizona, a group of DX'rs who haven't used WSPR to study propagation. They have ke

Geoff Fox 0fl15h1usia2tco6164 · Hi all. I'm K1GF, but writing in my capacity as science reporter for Newsy. I'd like to do a story about WSPR, the absolute opposite of broadband. I'm curious if any of

I have recently become aware of how little many Kiwi users appreciate the importance of filtering the RF feed to a Kiwi so as to minimize RF overload events. Each Kiwi receive job run by WD logs those

Greetings, y'all I am now chasing ov events here. Have installed the Flamingo - am bandpass filter, but seemingly still have some ov events around daybreak. The culprit are likely to be traced to two

As far as I can determine wsprdaemon is running fine since I got it started a day or two ago. I have noticed that the log file is full of repeated error messages of this type: Mon Oct 18 12:30:01 UTC

Very new to Linux & Pi, so being very cautious...but also not afraid to ask the very dumb questions that follow below. When I initiated a new installation of Wsprdaemon, it displayed a warning message

One of my favorite pastimes over the past few years has been playing a WSPR "game" I have taken to calling "radio limbo", i.e how low in RF output power can I go and still be spotted. Since about 1540

After a bit of a struggle with naming conventions for my remote receiver site 'KX4AZ/T' at EN74gc, I was able to get wsprdaemon going yesterday on the Pi4, so that spots are now being reported from my

Greetings y'all HB9VQQ is presently performing a test of Kiwi with Rpi4 running WD against an Airspy HF Discovery running Wsjtx with Rpi4 on the same antenna through a splitter https://groups.io/g/wsp

Using this link: https://wspr.live/gui/d/ereVvgn7z/station-noise-stats?orgId=1&refresh=1m the ONLY noise plots I can see are from KFS. No other station, including mine, has any data. Am I missing some

Hello all, I´ve been trying to run a single band wspr monitor with the audio input feature, but with no success. My present setup consists on a Funcube dongle, playong on the PC´s own soundcard. Since

This issue is more for Arne, but I do not have his e-mail adres. Perhaps someone can forward to him ? -------------- so: For Arne ---------------- Problem: Page: WSPR Daemon/ Station Noise stats This

My kiwis are all offline, as latest kiwi version 1.464 upgrade don't work Has someone a backup of Vers. 1.461 and can offer this for download ? I have older backups, but not 1.461 Version 1.461 was la

I have started to debug FST4W decoding in the WD 3.0 alpha but so far I can't find any signals at KPH on 630, and WSJT-x doesn't seem to identify such signals, if they exist, on other bands I am using

I have an eight channel installation running with great success. My local noise plot shows only a very few points however even though I have run the installation for several hours. Is there a way to t

Great, that kph is receiving again with the kiwi's... I thought I use the Japanese CW contest to make a screenshot of kfs (NWest antenna) and compare it with the TCI 530 at kph I know that this is not

Hi Yuri, I am adding this to the WD forum so others see the issue. I will be testing WD 3.0 installation on Ubuntu 20.04 and will address all such problems thanks for the report. Rob -- Rob Robinett A

I do not see new WSPR spots on wspr.rocks since 2230 UTC this afternoon (8/27/2021). Carol KP4MD