Yes, you can change the graph min/max in your conf file, but I can't find it right now. Clint is using that feature, so maybe he can help. I have added this to the list server so others can learn too.

Within a few minutes all signals on shortwave are complete erased and only noise can be heard from 1.8 to 30Mhz.... Just building at the antennas, I thought my equipment is hit by a static discharge a

Hello, I began to install and connect two of RTL_SDR at RaspberryPi 3B+. I configure wsprdaemon.comf to active two of RTL_SDR and run wsprdaemon correctly. But nothing seems to happen. So I check audi

I have added this to the data system I maintain. It's for those wanting to do local plotting etc. and not use Grafana or other means http://jimlill.com:8088/getdata.html/?call=WA2ZKD change my call to

Hi Rob, This night, 22 June just after local Midnight in California, I checked the Omni Antenna at kfs again: - both ports indeed show exactly the same signal (port 8073 and 8083) as it should - as it

After a power loss related issue, a few days ago. The header of my Ranking Page is now working again. -Jim

Hi, Can anyone recommend a 8way splitter to connect my kiwis and a GPSDO for my lab. What technology I need to look for, to pass DC to the outside antenna but don't (DC-)connect all Kiwis together...

0h15 (just after midnight California time) kfs report: - port 8073 *no OV-indications *background noise on dead bands (10m,12m...) is too high. Instead of -100dbm noiselevel, in this condition the kiw

Dear, During last night I probably had an Internet connection failuer, so from 20h utc yesterday until 4h utc in the morning, there was nothing uploaded. The wsprdaemon script created a lot of txt fil

Short skip conditions here in Europe make my 2x Xeon quadcore Workstation be real busy for the first time... 300km far away stations on 20m are 40db over S9 on the rhombic to northwest. This antenna f

Hello, This is to report my findings from night time usage of the kfs-antennas. I understand, that you have tried to find the various noise sources and reason for strong 'birdies' and other unwanted s

Hi all, I have just installed WSPRDaemon on a Pi4 and am running it in conjunction with a RaspSDR. WSPR Daemon and the radio board seem to be talking to each other but WSPRDaemon is not uploading any

building wsprdaemon server on UBUNTU 16.04 x86 system. I am getting failed to install libgfortran5 when wd -V. Ideas to fix? John

This kind of problem has been reported by others in the Wednesday WD Zoom call and fixed by upgrading to a more powerful CPU than the ARM on the Pi4. It appears that with the summer months and increas

Hi I'm using a Raspberry Pi 3B+ with 2 local LAN KiwiSDRs (one on v1.444, the other on v1.456) I recently had problems on the old SD card that was unwritable so i had to rebuild a 32GB SD with Raspber

I have been generating Type 2 messages but I can't see the prefix or suffix in the data on wsprnet.org.(e.g transmitted SM7PNV/p or OZ1/SM7PNV is shown as SM/PNV) I am guessing it is not reported from

What are the URLs for WSPR history? Are the bands dead? I have no spots. John

I have messed up and need a pointer to fix my mess. I left the Tail of the spots.log file running. Now wsprdaemon is giving errors "..no space for tmp file' at line 729. What directory on mt Pi 4 can

I have been working to get the daemon running on the 4GB nano. Most is looking well. The KIWIs are loading ok just no spot uploads. At decode time { 8 sec mark} I see a bump in CPU to 80% but it only

I was recently out in a "quiet place" to make noise floor measurements of my active antenna system. I did indeed find such a place which could reach the noise floor limitations of my system and propag