I tried this on a brand new WD install but this does not work with an unmodified .conf file. Catch22 or should I simply do some standard input into the .conf file and run the command again? Thanks Erw

I have 2.10k working on my Raspberry Pi Buster It starts the test and finds the Audio Codec But what to do then ? Adjust the input gain and restart test? [-+q] => + amixer: Unable to find simple contr

Hi, First time installing Wsprdaemon on raspberryPi, targeting wspr decoding from KiwiSDR. Keep failing ./wsprdaemon.sh -V on the message : E: Package 'qt5-default' has no installation candidate FATAL

Hi, Fresh install on RaspberryPi. I cant work around this error - "E: Package 'qt5-default' has no installation candidate". "FATAL ERROR: Failed to install 'qt5-default' which is needed to run the 'jt

Last night from 01:00h to about 03:00h UTC the Grafana page (clickhouse database, wspr.live) doesn't show any noise date Later this night periodically the noisedata is missing for shorter periods of t

See the attached clip. What does WD report?

Does anyone know where I can download a PI image for my raspberryKIWI? Mine will not boot. John TI4JWC

I made a whatsit updating my running wsprdaemon installation, so wrote a fresh RP card and a fresh greenfield installation of the current daemon. All is working except for a frequency band anomaly. I

04 January 2022 Newbie question, I havve been running the wsprdaemon for a long time but never updatd it, can I update a running, live installation remotely please? If so are there some idiot proof in

My remote dipole antenna ("KX4AZ-T") was clobbered by a windstorm around December 16th (last month). I believe my Pi was still uploading noise data during that period, so it would be interesting to se

Rob, I remember that you were working with the small GL.iNET router. Santa was good to me today and I now have the GL-MT300N-v2. To leap-frog common-mode and all the feed line problems, I am contempla

Has anyone been able to move a RaspberryKIWI from Ethernet to a WIFI dongle? How did you get it done? John TI4JWC

The attached pdf describes a project I've been working on to create a 0-2 GHz frequency extender for the KiwiSDR. This is in an early phase, it is NOT in mass production nor available for sale. It sho

Further experiments indicate that the issue is at wsprnet. If I run a non-WD kiwi's extension with WA2ZKD/K as reporter, all is well. If WA2ZKD is reporter, spots do not make it to the log there or ap

I have a TX running on 630M and it being heard but about 8 people, including myself. However, I don't see "spots of myself" in the wsprnet database. Is this a known issue? WA2ZKD

Recently I have a rather annoying problem with all my kiwis: After a random time of working, suddenly the kiwi will loose internet connection so the screen (waterfall and spectrum) freezes and the sta

Does anyone on this group have any knowledge of the status of the KiwiSDR forum? It has been read-only for quite some time. Is there any insight as to the reason or if/when it might return? With all o

FYI, the WSJT-x packages are built for b'buster'. Until they support 'bullseye' WD can't be installed on it.

I started to look for ways to improve my spotting. I figure I should record baseline information. I thought I would calibrate the signal level with my Elecraft XG3. I placed a 50 ohm load at the KIWI-

This is again something for Arne, the developer of the great Grafana page wspr.live The following may be a possible bug-report - I just want to notice: The grafana page offers the possibility to compa