I am noticing this error on my i7 server. Has anyone seen this? 73 Steve KD2OM

John Seamons issued a fix in v1.557 for the absence of GPS frequency corrections when there were no browser connections. The problem was outlined in post https://groups.io/g/wsprdaemon/topic/kiwisdr_g

On wspr live we find the helpful overview of FST4 spots. With a qualifier for the number of false decodes. How are these found ? I think HB9TMXC is an active low bands radio amateur, G6AVK is active o

Thanks for all the answers... I will look into ordering the necessary parts then to move on... I also need to find a way to get a connection from the GPS antenna through the concrete to the basement,

The False Decode trap/filter seems to be running well on my 8088 page. Its adaptive whitelist scheme is effective and my daily audit has noticed only bout 1 escape a day, literally. It is applied to a

nHello, Is there any modification advice document how to connect the Leo Bodnar GPSDO to the Kiwisdr ? From a rough study of the kiwi design document, it seems the PCB is providing a connection point

I have posted the following at https://forum.kiwisdr.com and hopefully there will be a fix in due course. In the meantime there is a workaround as set out below. I am grateful to Glenn, N6GN, and Tom,

(This is for Arne as the owner of wspr.live website) I noticed, that the colored squares at the top of the page in "WSPR Daemon/Station Noise Stats" are not filled in at all any more since a week or s

Gwynn uncovered a bug in the Kiwi SW that has been fixed by John Seamons in Kiwi SW v1.557 which was published this morning (California time). So if your Kiwis are not set to autoupdate (none or mine

Time to pick the hive mind here. My kiwi was off line for a day or 2 and is now again on line. Using the same ethernet switch, getting the same IP address as before, trying to access from the same pc

For a year, I've used a pair of these https://www.amazon.com/dp/B07SBD2T4F to connect my "radio room" to my "IT closet", a 20m run to the other end of the basement. At the radio end, I used a Linksys

Barring any new bugs... the cut over to the new filter scheme will occur sometime after 5PM today. Interesting, the false totals I get seem to match or be within 1-2 of what Phil has on wspr.rocks The

Dropping 80 Meters Hope to have it back soon Sent from Mail for Windows

I decided to try installing WD on a Pi4 that I use for an openwebrx server and a TV signal bandscan that uploads to rabbitears.info. That's all it does. During the WD installation I eventually reached

I've added another way to view rejected calls. This works on the calls the filter is finding. This data is valid but is not being applied to the current ranking pages just yet http://jimlill.com:8088/

Today I have switched to 2 modes, 120 and 300 Time band mode 0 10 2 5 10 5 10 15 2 15 15 5 20 20 2 25 20 5 30 30 2 35 30 5 40 40 2 45 40 5 50 80 2 55 80 5 Rinse repeat 2 = 120 second 5 = 300 second 73

Forgive my ignorance of all aspects of using WS{R, but I would appreciate some guidance. My objective is to compare the performance of several antennas, viz., two different designs of Hex-Beams and 6

The new filter does not affect the current 8088 page but some of what it is doing can be viewed http://www.jimlill.com:8088/data/tx.rej will show the tx calls getting rejected. If you note something t

Hi, Since upgrading to the latest WD version spots are no longer being uploaded and I am seeing the following error at the command line. /home/pi/wsprdaemon/decoding.sh: line 660: 3: command not found

Got a type 5 hit from LR9XFA John TI4JWC