Nice condx from Belgium to west-coast USA on 40m this afternoon - 14h30 utc.... N7XM booming here from close to Carson City, Nevada in CW band ... many others now as well... the CW-band is full of lou

Rob, this is a question for the code-expert...: Sometimes I have some fence pulse noise on one of my antennas. I found out, that when listening on this antenna with the kiwi, I can completely erase th

No spots sinds several hours... My local PC works normally with well above 2000decodes/hour... But nothing appears at the servers ??? Ulli

All, I am new to WsprDaemon, having only had things up and running for a couple of days. Pretty modest station - single KiwISDR with 8 WSPR channels into an end fed half-wave cut for 20M. Currently I

Rob, just for info I confirm, that I upload the spots correctly to wsprnet.org - so the reason why there are no spots visible at Phil's site (wsprd.vk7jj) is NOT because there is nothing uploaded... Y

Have observed that VK7JJ is dropping spots. Just found 10 minutes missing whereas they are OK on WSPRnet. I suspect that there are more to this, but have not had time to dive into it. It appears that

I have found and fixed a problem with the scraping of the wsprnet.org spot data. It appears that recently the wsprnet.org servers have become more heavily loaded and as a result they are frequently ta

After dabling with WSL I decided to see if wsprdaemon would install and run under Win 10 pro VM with Ubuntu 20.04. The answer is it does install and run but here I did not have great success uploading

All, Is anyone using Wsprdaemon with an Sdrplay RSP1A? If so, I would be interested in your configuration and if you managed to get it to work with more than one simultaneous receive? Having got my Ki

I would like to use Atomic Pi to run Wsprdaemon. I am having problems getting started. Atonic Pi comes with Lubuntu 18.04, the current version is 20.04. I have not found any documentation for 18.04. I

I installed Ubuntu 20.04 on AtomicPi , added new user wsprdaemon, set the su level, but when I do the git clone https:github.com.......... the command I get the error git not found. Ideas for the new

Happy new year to everybody... As I was focused on family matters today, I didn't pay attention to what happened with the wsprdaemon-receivers. This afternoon however I was astonished of rather less s

I finally got a good install of Ubuntu 20.04. I removed all the unnecessary apps that leaves me with 7 G mem. When installed wsprdaemon I got the error "Package python-numpy has no installation candid

It seems to me, that the wsprnet.org website is still not under control ... The only real problem with this is, that nobody knows, as there is no clear announcements from the system administrators, wh

My first KIWI is using 8 bands of vertical 10M -80M. Mu wsprdaemon.conf lists: "KIWI_0 192.168.2.160:8073 TI4JWC EK70wb and declare WSPR_SCHEDULE_complex=( "06:00 KIWI_0,80 KIWI_0,40 KIWI_0,30 KIWI_0,

The recent Wsprnet issues have coincided with me moving to using Wsprdaemon. I hope it wasn't me.... Good morning All, As a result of the recent Wsprnet disruption, it has been quite difficult to see

I am still seeing ERRORS when I start WD. What is my config error? John TI4JWC ===================== pi@raspberrypi:~/wsprdaemon $ wd -a -V wsprdaemon.sh Copyright (C) 2020 Robert S. Robinett This pro

Greetings, I just found this database and group - really wonderful. Thanks all for work making it possible. Here's an example showing how to query the db using R: https://inductivestep.github.io/WSPR-

Following the posts to this Forum on data presentation and analysis by Andi Fugard using R and Greg Beam using PySpark and other 'Big Data' packages I have added summaries of their methods in an updat

Hello All, I just recently found WSPR Daemon ( Very Cool !! ), and I'm very interested in how this will progress over the next SS cycle. I had started a similar project (on a much, much smaller scale)