I have created this group to communicate with users of my Wsprdaemon (WD) WSPR recording program. See www.wsprdaemon.org for details about installing and using WD and exploring the spot data services

Now available is a four channel Kiwi system at KFS, Half Moon Bay, CA. Each Kiwi receiver is connected to a different TCI antenna; Omnidirectional, Northwest Sector, Southwest Sector, and Southeast Se

I purchased the buck converters to step down from 12V DC to 5V DC to power the kiwi-rx Many vendors are selling them on Amazon and e-bay As they arrived I am astonished, that the Buck converter module

On Client: sudo apt-get install ntpdate sudo ntpdate -u yourkiwiaddress Kiwi needs no mods. Port should be open on lan.

This version adds checks for libraries needed to run wsprd v2.3.0-rc1 now used by WD

Just as an FYI for some people, that the www.physics.princeton.edu webserver does not serve traffic to certain IPs or certain IP ranges. How did I find this out? Guaranteed time outs from my home netw

As I am in the process to start up the receiver after relocation, I updated/upgraded the long not used Raspberry... I was astonished about the HUUUUUGGGE update... I thought it is time to "git pull" t

I am attempting an Advanced search and it works fine. I have followed the instructions to save the search parameters I have entered and it works ok. I have asked for the search to be reloaded when I r

What is the command sequence to continuously display the decode counts and upload counts? John

With the latest system updates of the pi and latest update WD (git-pull), I think there is a problem with the python3-numpy package. As you remember, during the WD installation on my fresh and clean U

As I am tweaking the new set-up to get rid of all kind of faults (many thanks for help, Rob), finally I have the computer running. Although the Raspberry is not sufficient any more... I now run 12 cpu

About 2weeks ago, during the construction work for the relocation if the wspr receivers, I was QRV on transmit WSPR with 5wtts and many USA-Stations copied me... Including many here in the forum and f

I am interested in obtaining WSPR spot reports without running the database. The Python script at the end of the TimeScale documentation is what I want to do. I don't know Python sufficiently to devel

Rob my old URL is not working today. would someone please send the current URL. John TI4JWC

Earlier today I checked in a fix for a problem with WD failing to connect to Kiwis during startup. The was due to a race condition which only appears on very fast servers, e.g. a quad core i7. If your

I think I found and fixed that problem which has been reported by several users. Let me know if you still experience rx channels which come up only after some minutes, or never at all.

If your WD is running, then there is no need to upgrade to this version.

I've updated and expanded my Guide to the WsprDaemon Timebase installation. It's attached as a file to this message and available via the WsprDaemon Timescale web page. The Guide is now fully consiste

Hi, In case you missed it, Kiwi release v1.417 adds setting the Beagle/RPi's date/time from GPS as requested by Rob back on October 7 on the Kiwi forum: http://valentfx.com/vanilla/discussion/2128/obt

In Wednesday's Zoom meeting we discussed my plan to add this feature, and based upon that feedback I won't rush to implement it. However, since many of the top spotters are running WD, it is at the to