Second KIWI setup?


John
 

My first KIWI is using 8 bands of vertical 10M -80M. Mu wsprdaemon.conf lists:
        "KIWI_0                  192.168.2.160:8073     TI4JWC         EK70wb   
and
 
declare WSPR_SCHEDULE_complex=(
        "06:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "07:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "08:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "09:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "10:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "11:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "12:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "13:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "14:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "15:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"...................................

For the schedule.

For the second KIWI on the Hex beam I think this will be the new arangement.
declare RECEIVER_LIST=(
        "KIWI_0                  192.168.2.160:8073     TI4JWC         EK70wb    
         KIWI_1                  192.168.2.161:8073     TI4JWC         EK70WB  
and
 
declare WSPR_SCHEDULE_complex=(
        "06:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "07:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "08:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "09:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "10:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "11:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "12:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10

for the combined schedule.
I am not clear how to use the "Merge" assignments. I want to avoid double listing the same spots.

John
TI4JWC
  


Rob Robinett
 

It appears that all of your rx channels are the same  all day, so your config file can be much simpler.
mail your config file and I'll fix it up.

On Tue, Jan 5, 2021 at 3:59 PM John via groups.io <n0ure=yahoo.com@groups.io> wrote:
My first KIWI is using 8 bands of vertical 10M -80M. Mu wsprdaemon.conf lists:
        "KIWI_0                  192.168.2.160:8073     TI4JWC         EK70wb   
and
 
declare WSPR_SCHEDULE_complex=(
        "06:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "07:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "08:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "09:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "10:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "11:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "12:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "13:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "14:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"
        "15:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10"...................................

For the schedule.

For the second KIWI on the Hex beam I think this will be the new arangement.
declare RECEIVER_LIST=(
        "KIWI_0                  192.168.2.160:8073     TI4JWC         EK70wb    
         KIWI_1                  192.168.2.161:8073     TI4JWC         EK70WB  
and
 
declare WSPR_SCHEDULE_complex=(
        "06:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "07:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "08:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "09:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "10:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "11:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10
                KIWI_1,20  KIWI_1,17 KIWI_1,15 KIWI_1,12 KIWI_1,10 "
        "12:00  KIWI_0,80  KIWI_0,40 KIWI_0,30 KIWI_0,20 KIWI_0,17 KIWI_0,15 KIWI_0,12 KIWI_0,10

for the combined schedule.
I am not clear how to use the "Merge" assignments. I want to avoid double listing the same spots.

John
TI4JWC
  



--
Rob Robinett
AI6VN
mobile: +1 650 218 8896


Edward Hammond
 

On 1/5/21 5:59 PM, John via groups.io wrote:

I am not clear how to use the "Merge" assignments. I want to avoid double listing the same spots.
I'm interested in similar antenna experiments, and have the same question about avoiding duplicate submissions.

Of course I could put a suffix on the callsign of one of the Kiwis, but it would be preferable to report both under the same call.

I fear, though, that there's no easy answer.

EH


Rob Robinett
 

WD fully supports getting spots for 2 or more Kiwis, selecting one set of the best received spots and uploading only one copy of each spot under the single receiver call sign to wsprnet.org.
 
In addition, WD creates a log file where all spots are listed and a comparison of the SNR of the spots is listed.
Further, all spots from all receives can be recorded in the wsprdaemon.org SQL database for further analysis and text and graphs using SQL and Grafana.
Download WD and you will find in the config file a template for MERGE receivers.

Rob


Gwyn Griffiths
 

Edward,

Your interests in antenna experiments are very much catered for through Rob's WD script and the Grafana dashboards I've created. To add to Rob's answer with my own example.

Having looked at Rob's template, you can see the context for these key lines, where I've substituted *** for the passwords. First the receiver list. The receiver name on the left is included in each spot data row sent to the wsprdaemon database whereas it is the third column that is used as the identifier to wsprnet. In this example I want to identify between the two receivers on wsprnet on some bands, hence the G3ZIL and G3ZIL/S. I'm also creating a merged receiver, where the best SNR between G3ZIL_1 and G3ZIL_2 is reported to wsprnet as G3ZIL; as Rob says, this avoids double reporting to wsprnet. However, the original individual receiver data is available in the wsprdaemon database.

declare RECEIVER_LIST=(
        "G3ZIL_1                  10.0.1.44:8073     G3ZIL      IO90hw    ****"
        "G3ZIL_2                  10.0.1.78:8074     G3ZIL      IO90hw    ****"
        "G3ZIL_4                  10.0.1.44:8073     G3ZIL/S    IO90hw    ****"
        "MERGED_RX                G3ZIL_1,G3ZIL_2    G3ZIL      IO90hw    ****"
)

And so, we can look at the data from Callsign G3ZIL and receivers G3ZIL_1 and G3ZIL_2 on the Grafana dashboard at
http://logs2.wsprdaemon.org:3000/d/MBseDfvMz/merged-receiver-comparisons-from-wsprdaemon-tables?orgId=1&from=now-2d&to=now-1m&var-Callsign=G3ZIL&var-receiver_A=G3ZIL_1&var-receiver_B=G3ZIL_2&var-band_m=20

These dashboards are taking quite some time for initial load and then some panels take a fair time - but I hope that via this comprehensive example dashboard you can see that wsprdaemon really does provide a great starting point for antenna experimentation. Check out more information on our Grafana dashboards at:
http://wsprdaemon.org/ewExternalFiles/Setting_up_Timescale_Grafana_dashboards_V2-2.pdf

I have dropped you an email to your address on QRZ.com with the password.

73
Gwyn


Edward Hammond
 

Well, I guess I'm out of touch.  I've been running WD for months.  :-)  (W3ENR)

EH


On 1/5/21 10:12 PM, Rob Robinett wrote:
WD fully supports getting spots for 2 or more Kiwis, selecting one set of the best received spots and uploading only one copy of each spot under the single receiver call sign to wsprnet.org.
 
In addition, WD creates a log file where all spots are listed and a comparison of the SNR of the spots is listed.
Further, all spots from all receives can be recorded in the wsprdaemon.org SQL database for further analysis and text and graphs using SQL and Grafana.
Download WD and you will find in the config file a template for MERGE receivers.

Rob