wsprdaemon@groups.io

Home Messages Hashtags

Messages

Between

and

Re: Rejected

to date, nearly every misformed spot has been missing a grid, so that would be an easy filter I think On 5/26/22 15:00, Rob Robinett wrote:

By Jim Lill · #885 ·

Re: Rejected

I informed him.... and he is going to revise his scheme at some point On 5/26/22 15:08, Rob Robinett wrote:

By Jim Lill · #884 ·

Re: wsprdaemon with SDRplay devices on Raspberry Pi 4

I happened to notice on Aliexpress (search for 'RSP1') there are a ton of RSP1 clones based on the msi2500 chip, that have either a single input with DIP switches for input filtering, or are equipped

By Bruce KX4AZ · #883 ·

Re: Rejected

I think G4ZFQ is the only site transmitting on both 60M bands during the same WSPR cycle. Perhaps he too doesn't know that 1/2 of such spots are being rejected by wsprnet.org -- Rob

By Rob Robinett · #882 ·

Re: Rejected

If you send me a list of rejected spots I will try to enhance the filtering I already do on spots before uploading them thanks -- Rob Robinett AI6VN rob@... mobile: +1 650 218 8896

By Rob Robinett · #881 ·

Rejected

I have started tracking which spots get rejected on wsprnet uploads. The wsprdaemon.sh -le command in v3.02 is useful for doing this. I have found 2 categories so far bad decodes

By Jim Lill · #880 ·

New -A and -Z command line options in WD 3.0.2

I almost always execute 'wd -a' to start WD and 'wd -z' to stop it. However if you want to have WD start automatically after power-up or reboot, then execute 'wd -A'. It configures Linux to run WD at

By Rob Robinett · #879 ·

Re: FST4W and 22M now working in version 3.0.2

Hi Gerhard, I think you may need to stop your WD 2.10 before starting WD 3.0.2 If you are already doing that, then I would need ssh access to your odroid to further debug the problem. PM me if you

By Rob Robinett · #878 ·

Corrected and more informative wd_template.conf now available in 3.0.2

I have just checked in a revision of that file which (I hope) fixes a few errors and adds a much more detailed explanation of the settings in your wsprdaemon.conf For those of you already running

By Rob Robinett · #877 ·

Re: FST4W and 22M now working in version 3.0.2

Hi Rob, What I did since: Installed WD 2.10 on clean Odroid XU4 without problems and was runing 14 chanals over night. Now changed to v3.0 and the problem with reconnection to the SDR happend

By Gerhard, OE3GBB · #876 ·

Re: WD 3.0.2.4 update adds improved support for 'noise level only' bands

with CHU close by to NY.... we might find similar of use here On 5/21/22 14:17, Rob Robinett wrote:

By Jim Lill · #875 ·

WD 3.0.2.4 update adds improved support for 'noise level only' bands

In response to a user request, have tested and checked in enhancements to 3.0.2.4 which add support for the feature you requested which runs the quickest wsprd on those 'noise level only' bands like

By Rob Robinett · #874 ·

Re: WD 3.0 beta testing

Thanks dear Rob, OK all I'm looking forward to apply RTL-SDR. 73, Hidehiko JA9MAT

By Hidehiko Komachi - JA9MAT · #873 ·

Re: WD 3.0 beta testing

I'm sorry but it is a completely untested feature and I was unable to find a driver which could tune the RTL with sufficient accuracy for WSPR decoding. -- Rob Robinett AI6VN rob@... mobile: +1 650

By Rob Robinett · #872 ·

Re: WD 3.0 beta testing

Hello, I'd like to test RTL-SDR on WD 3.0 beta version. Is this avairable now? Hidehiko JA9MAT

By Hidehiko Komachi - JA9MAT · #871 ·

Re: FST4W and 22M now working in version 3.0.2

run 'wsprdaemon.sh -l e' and you will see all log lines with "ERROR ..." they might give you a clue as to why your system isn't working. -- Rob Robinett AI6VN rob@... mobile: +1 650 218 8896

By Rob Robinett · #870 ·

Re: FST4W and 22M now working in version 3.0.2

Hi, Have installed V3.0 first on the odroid XU4 (Ubuntu). Istallation seems to be OK, but did not work. The connection to the SDR is allways broken right after 2 minutes. Therefore no decoding and

By Gerhard, OE3GBB · #869 ·

Re: FST4W and 22M now working in version 3.0.2

Look in wd_template.conf for explanations of the format. During startup WD now checks that there is enough space in the tmpfs /tmp/wsprdaemon file system for the wav files recordings ### Following the

By Rob Robinett · #868 ·

Re: FST4W and 22M now working in version 3.0.2

Hi Rob 3.0.2 has been running drama-free on my Pi4 here. I will look to see what is needed to enable FST4W. Is there a sample config or a README to help? John K5MO

By John K5MO · #867 ·

Re: FST4W and 22M now working in version 3.0.2

I know that in the recent past Jim WA2ZKD has installed WD on his odroid systems. WD 3.0 includes the option for you to configure it to give me remote access if you need installation help. -- Rob

By Rob Robinett · #866 ·

1161 - 1180 of 2039

Home Hashtags About Features Pricing Updates Terms Help Twitter