Thanks Rob and Glenn for your comments. I am doing tests with a pair of phased loops so good current balance and they are each coupled to their feedline through an isolation transformer at the

I recall that my Pi4 consumes only .5A while running WD. But I run the Pi remotely and have it connect via wifi to the Kiwi so as to eliminate the ground loop which would be introduced by having the

Joe, To be honest, though I have a portable system intended to approach the propagated noise floor over LF-HF I continue to learn about impediments to achieving this.  My current best method,

Hi Glenn Thanks for the very quick and informative response. Since I have no experience with the Pi, before I buy one do you have any other recommendations given that I intend to run this from a

Joe, You understand this correctly. Even an RPI 3 can handle simple spotting, noise and SNR measurement when used with WD. Data can be recorded apart from an Internet connection and

Hello to all, I am Joe ve3vxo and have been running a Seed KiwiSDR for a couple of years now. I have been using it to evaluate low band receive antennas using the wspr extension. Recent experiments

Overflowing uploads.d/... suggests that your WD server is failing to upload to wsprnet.org and/or wsprdaemon.org. To get a list of spot and noise files cache for uploading execute: find

Hi Yuri, WD v2.x is designed to perform almost no logging when started in its default verbosity level 0 mode, e.g.: 'WD -a' Many sites have been running for months without overflowing their file

Also 17m, Tom: https://wspr.live/gui/d/L2qXuEk7z/beacons-to-specific-station?orgId=1&refresh=5m&var-beacons=IU2PJI&var-band=18&var-me=WA2TP 73s, Ulli

They are TX'ing 24x7x365 following the WSJT-X Band hop plan. Thanks for reports. Stay tuned for more Beacons to come alive in the next couple of days/weeks https://twitter.com/IntlWspr

I am Also hearing you on 20,30,40 -12 peak.

Yes, you can change the graph min/max in your conf file, but I can't find it right now. Clint is using that feature, so maybe he can help. I have added this to the list server so others can learn

Ulli, I saw the same here. all of s sudden spots count uploads went from ~50-60spots per cycle down to 6-10.

https://wspr.live/gui/d/L2qXuEk7z/beacons-to-specific-station?orgId=1&var-beacons=IU2PJI&var-band=7&var-me=KD2OM

I am hearing the beacon on 40,30 and 20. Between -13 and -27 SNR 73 Steve KD2OM On 7/3/21 1:01 PM, Roland wrote:

Within a few minutes all signals on shortwave are complete erased and only noise can be heard from 1.8 to 30Mhz.... Just building at the antennas, I thought my equipment is hit by a static discharge

Just a quick heads up, first WSPR Beacon has gone live. IU2PJI is band hopping on 8 Bands. More Beacons will follow very

Thanks Rob quickly reply! OK all about RTL_SDR issues, I will continue to looking for your progress to resolve it. "Wsprdaemon" is the best for energy saving wspr receiving. 73 and thanks for nice

Welcome Hidehiko, The RTL-SDR support in WD V2.x is very experimental and even I haven't used it in many months. 'wd -i' is used with baseband AUDIO input devices which is functional but to use it you

Hello, I began to install and connect two of RTL_SDR at RaspberryPi 3B+. I configure wsprdaemon.comf to active two of RTL_SDR and run wsprdaemon correctly. But nothing seems to happen. So I check