Looking at the data, I see that the EU advantage over North America is on 17-10m While I'm sure that much of that is from E and F skip I'd bet there is some GW and Ground Scatter in there

We US stations might as well pack up our tents and go home:) As soon as the cycle moves along we will be lucky to make the top ten World Wide. 73 Steve KD2OM .

just checked: 20m only spots frequently about 40stations per 2min... currently at 900spots/hour - incredible and only possible with the current decoder, I guess - I don't think earlier versions were

In the meantime, I must correct my report from above. There are indeed also during the night severe man-made noise sources, which I believe are produced somewhere in the signal distribution

Short skip conditions here in Europe make my 2x Xeon quadcore Workstation be real busy for the first time... 300km far away stations on 20m are 40db over S9 on the rhombic to northwest. This antenna

One of our users is tying to use a RaspSDR and neither auto-wspr nor WD are seeing signals which are present on the main waterfall display.

Details sent via PM

Can you give me ssh access to your Pi? Or we could do a Zoom session

Hi Rob, There is only the entry in the log file for starting the pid and then nothing else. I have watched the updates and I get the message that states that the files contained no spots and that the

Hi Duncan, Is there anything in the ~/wsprdaemon/wsprdaemon.log file? if not, then to watch the upload daemon: cd ~/wsprdaemon/uploads.d/wsprnet.d/spots.d/ increment the

Hi all, I have just installed WSPRDaemon on a Pi4 and am running it in conjunction with a RaspSDR. WSPR Daemon and the radio board seem to be talking to each other but WSPRDaemon is not uploading any

Yes - now at local California midnight observing (dead) 20m band... All antennas show noise - strongest warterfall bars are every 180kHz..... Also the empty 10m looks rather dirty... yesterday this

Thanks Ulli, I don't have time this morning to respond fully, but my quick look showed no IMD but the switcher RFI still present. I will compose a report later which fully explains my

Hello, This is to report my findings from night time usage of the kfs-antennas. I understand, that you have tried to find the various noise sources and reason for strong 'birdies' and other unwanted

I ended up with a version deadlock between cmake and the library listed. I upgraded tom18;04 and all went OK. I built wsjtx from source and all wsprdaemon is good. John

I can't imagine that binaries for 20.04 could run on 16.0, but anything is possible. After jt-x installation, can you execute 'wsprd' from a terminal window? -- Rob Robinett AI6VN rob@... mobile: +1

I did a package scan at packages.ubuntu.com and find it is ONLY listed for 21.04. Are there options on apt-get to get from 21.04? Will that LIB work on a 16.04 machine?

I copied ws[rd, jt9 and wsprd.version over to wsprdaemon/bin form a x86 laptop and did a chmod +x but I still get the libgfortran5 message with wd -V

run 'find / -name wsprd' to find where wsjt-x puts it -- Rob Robinett AI6VN rob@... mobile: +1 650 218 8896

Nope, did not work. wsjtx installed with no errors. I ran wsjtx and got two displays. The control display would not stretch to give a proper field display. There is no wsprd file in the bin folder to