Re: WD config errors


John
 

Here is with a comma added. I get the same errors..

 # To enable these options, remove the leading '#' and modify SIGNAL_LEVEL_UPLOAD_ID from "AI6VN" to your call sign:
#SIGNAL_LEVEL_UPLOAD="noise"       ### If this variable is defined and not "no", AND SIGNAL_LEVEL_UPLOAD_ID is defined, then upload signal levels to the wsprdaemon cloud database
                                   ### SIGNAL_LEVEL_UPLOAD_MODE="no"    => (Default) Upload spots directly to wsprnet.org
                                   ### SIGNAL_LEVEL_UPLOAD_MODE="noise" => Upload extended spots and noise data.  Upload spots directly to wsprnet.org
                                   ### SIGNAL_LEVEL_UPLOAD_MODE="proxy" => In addition to "noise", don't upload to wsprnet.org from this server.  Regenerate and upload spots to wsprnet.org on the wsprdaemon.org server
SIGNAL_LEVEL_UPLOAD="yes"          ### If this variable is defined as "yes" AND SIGNAL_LEVEL_UPLOAD_ID is defined, then upload extended spots and noise levels to the logs.wsprdaemon.org database and graphics file server.
SIGNAL_LEVEL_UPLOAD_ID="TI4JWC"    ### The name put in upload log records, the the title bar of the graph, and the name used to view spots and noise at that server.
SIGNAL_LEVEL_UPLOAD_GRAPHS="yes"   ### If this variable is defined as "yes" AND SIGNAL_LEVEL_UPLOAD_ID is defined, then FTP graphs of the last 24 hours to http://wsprdaemon.org/graphs/SIGNAL_LEVEL_UPLOAD_ID
#SIGNAL_LEVEL_LOCAL_GRAPHS="no"    ### If this variable is defined as "yes" AND SIGNAL_LEVEL_UPLOAD_ID is defined, then make graphs visible at http://localhost/
 
##############################################################
### The RECEIVER_LIST() array defines the physical (KIWI_xxx,AUDIO_xxx,SDR_xxx) and logical (MERG...) receive devices available on this server
### Each element of RECEIVER_LIST is a string with 5 space-seperated fields:
###   " ID(no spaces)             IP:PORT or RTL:n    MyCall       MyGrid  KiwPassword    Optional SIGNAL_LEVEL_ADJUSTMENTS
###                                                                                       [[DEFAULT:ADJUST,]BAND_0:ADJUST[,BAND_N:ADJUST_N]...]
###                                                                                       A comma-separated list of BAND:ADJUST pairs
###                                                                                       BAND is one of 2200..10, while ADJUST is in dBs TO BE ADDED to the raw data 
###                                                                                       So If you have a +10 dB LNA, ADJUST '-10' will LOWER the reported level so that your reports reflect the level at the input of the LNA
###                                                                                       DEFAULT defaults to zero and is applied to all bands not specified with a BAND:ADJUST
 
declare RECEIVER_LIST=(
        "KIWI_0                  192.168.2.160:8073     TI4JWC         EK70wb    6105
         KIWI_1                  192.168.2.161:8073     TI4JWC         EK70wb    6105
         MERGED_0_1              KIWI_0,      KIWI_1     TI4JWC         EK70wb  " )
 
### This table defines a schedule of configurations which will be applied by '-j a,all' and thus by the watchdog daemon when it runs '-j a,all' ev ery odd two minutes
### The first field of each entry in the start time for the configuration defined in the following fields
### Start time is in the format HH:MM (e.g 13:15) and by default is in the time zone of the host server unless ',UDT' is appended, e.g '01:30,UDT'
### Following the time are one or more fields of the format 'RECEIVER,BAND'
### If the time of the first entry is not 00:00, then the latest (not necessarily the last) entry will be applied at time 00:00
### So the form of each line is  "START_HH:MM[,UDT]   RECEIVER,BAND... ".  Here are some examples:
 
declare WSPR_SCHEDULE_simple=(
         "00:00  KIWI_0,80   KIWI_0,40   KIWI_0,30  
                 MERGED_0_1,20   MERGED_0_1,17 MERGED_0_1,15 MERGED_0_1,12 MERGED_0_1,10 " )
 
###declare WSPR_SCHEDULE_complex=(
###         "06:00  KIWI_0,80      KIWI_0,40 KIWI_0,30  MERGED_0_1,20 MERGED_0_1,17 MERGED_0_1,15 MERGED_0_1,12   MERGED_0_1,10"       ### KIWI_0 => 7 rx channels (80/40/30/20/17/15/../10), KIWI_1 => 7 rx channels (../40/30/20/17/15/12/10)
###         "18:00  MERGED_0_1,80  MERGED_0_1,40 MERGED_0_1,30  MERGED_0_1,20 MERGED_0_1,17 MERGED_0_1,15 KIWI_0,12   KIWI_1,10"           ### KIWI_0 => 7 rx channels (80/40/30/20/17/15/12/..), KIWI_1 => 7 rx channels (80/40/30/20/17/15/../10)
###)
 
### This array WSPR_SCHEDULE defines the running configuration.  Here we make the simple configuration defined above the active one:
declare WSPR_SCHEDULE=( "${WSPR_SCHEDULE_simple[@]}" )
 

Join wsprdaemon@groups.io to automatically receive all group messages.