Hi, I can not get FSK to work in FLDIGI. Has anyone got it to work? What settings do I need? I have a FT-950 with Yaesu SCU-17 interface. FSK with MTTY works Thanks! N9WVM, John

join kd5foy larry

I use FLRig to control my 7300. I've noticed when selecting CW from another mode like USB, the radio goes into CW mode momentarily, then goes to CW-R mode. Selecting CW again switches the mode to CW a

Is there a way I can get the FLRIG program to retain the com port? each time I start the program I have to set the com port. Rick KR7V

Having 2 problems that I can't seem to solve. I am using Windows 10 pro, IC-7300, Winkeyer USB, FLrig version 1.3.41 and FLdigi version 4.0.18. 1. The first problem I can't save the Winkeyer settings

All, A few weeks ago, I inquired about a problem I had about "pointing" to a signal on the waterfall that I wanted to communicate with. Upon "pointing", my rig immediately went into transmit for an un

Hello To All, I have read on the forum that a SignaLink can be used by 2 radios if the wiring is configured correctly. I have an old 1979 era Yaesu FT 101ZD HF radio. This radio has no USB or data con

Good afternoon, I am exploring setting up command for some common functions I use on my FT-450D. I'm starting with sending the command to send pre-recorded commands out via the VM1TX and VM2TX command

I has helping a guy get set up with the NBEMS suite. He has to acoustic couple because his 2m radio doesn't have a data port, and for our net he needs to be able to do both voice and digital during th

Hola, Updated to 4.0.18 FYI. I've been using a K2 with rig control, no problems, but today was trying out a TT Scout 555, which has no rig control, so there is no freq tracking in either direction. Th

Is anyone using the TS 480 on the digital modes? I am having trouble getting things working, Need to know what someone else is using. I am able to connect to the radio using usb to rs232, but having t

Greetings To All, I am new to the digital world of Ham radio. I just upgraded to General Class in November. I do not know where to begin with capturing digital coomunications. I have no idea what band

I have a problem with FLAMP running but shutting down within a few seconds. I always start FLDIGI and then start FLAMP. FLAMP will run but then shuts down after a few seconds. No message is displayed.

GM All, I am trying to copy the weather RTTY transmissions at 10100.8 MHz. It is suppose to be 50 baud at 425 /450 hertz spacing. Sometimes when I use fldigi it will copy it just fine, at other times

So last night I'm on 80 meters 3572.9khz to be exact and I'm hearing a very strong signal coming in. I tried all the usual digital mode in FLDIGI but none would decode it. I did not try FT8 as I assum

At Source Forge and at the w1hkj.com web site: flrig-1.3.41.tar.gz flrig-1.3.41_i386.dmg flrig-1.3.41_macos.dmg flrig-1.3.41_ppc.dmg flrig-1.3.41_setup.exe flrig-help.pdf flrig-help.zip flrig.txt read

I also have the same problem with FLRIG losing all of the settings on exit. Each time I run the application, I have to reconfigure the IC7100 and ports again. I looked in the c:\users\<ownername>\flri

My TS590S decodes RX CW correctly and displays RX signal in waterfall. When I transmit using key or keyer (not from FLDIGI) the waterfall goes blank and no TX CW is decoded. Not sure if issue is on co

I have created an avatar in .png format. I placed it in the avatar folder for fldigi. How do I get it to display and transmit? All I ever see is the tux avatar.

Is there any way to get the received SECTION into fldigi and logged into N3FJP logging program? I know there are some macro words related to logging but cannot figure them out! Contest starts in an ho