Opps. Somehow I got it in my head that you had a 7300 in the mix. Guess I’ve been reading too many emails. :) Hope you find where the signal is getting lost or at least seriously attenuated. 73, Cliff

#arhab

Thanks. I do not have a 7300. I have RTLSDRs that I have been experimenting with. Wonderful mixed mode decoders in scan mode and work well, along with VB Cable for my satellite decoding work. I did tr

#arhab

Hi Jon, I suspected the old version would now show the same thing. Something has changed to lower your signal strength. Check the 7300 menu/set/connectors/Acc/USB AF Output Level. I run mine at 80%. T

#arhab

I removed the old version thinking maybe a conflict. It did the same as the new version after the upgrade. I did test the squelch effect on decodes. If I set the squelch on and above the green signal

#arhab

Hmmm…. What version of fldigi were you using before the upgrade? If you run that version does the waterfall display normally? Set the squelch slider at about 15% and see if the decoding stops. Regardi

#arhab

Thanks. Settings were near spec but I altered them to your suggested settings. No difference. I can see, in the upper wide yellow section, the software decoding to text but since I can't use the water

#arhab

I suspect the 2 numbers to the right of the WF button that affect the waterfall contrast got changed somehow. Set them to 0 and 70 for starters if they are not somewhat close to those numbers already

#arhab

Software was working yesterday, decoding CW nicely. I upgraded to newest version. Scope shows signal and SIG button shows signal but no waterfall when button is on WF. I checked CONFIGURE - SoundCard

#arhab

Hello all, Sorry if I'm posting this in the wrong place and etc. It's my first post here. I need some confirmation of behavior. It seems that regular expressions are expanded in the popup notifier for

#arhab

First, make sure that RxID is turned on. It's in the upper right corner, next to "TxID". If it is, click "Configure", "UI", "User Interface", click the "ID" tab, then "RsID" and make sure everything i

#arhab

Can you see if the transmitting station is sending the ID sig at the beginning? Many stations don’t send any ID signal so RxID won’t be able to identify the signal. 73, Cliff, AE5ZA

#arhab

I just installed the latest FLDIGI release onto my XP laptop. The first time I started it up, the RDIX and TXID seemed to be working fine, I was able to Identify an Olivia transmission as well as an M

#arhab

OK David, I can test it. I'm not a programmer, but I often use FLDIGI and I can test. Robert

#arhab

Hallo David. Perhaps I have misrepresented myself - bug. Choice option in rtty modem FSK/sound card it would be a good solution. Best 73, Robert W dniu czw., 27.09.2018 o 21:56 Dave <w1hkj@...

#arhab

Robert, Do you want to test an alpha version of fldigi with the code change, or wait until the next general release? 73, David

#arhab

Glad you discovered the problem Robert. What is a bug for one might be a feature for another. If you were using the nanoIO / MORTTY interface for both CW and RTTY then changing modes is accomplished w

#arhab

Great. Thanks for letting us know. 73, Cliff, AE5ZA

#arhab

Hmmm….. It doesn’t make a lot of sense then. RTTY has just always worked for me. If PSK and other modes work, RTTY uses the same sound path so something is preventing it working correctly. Could you s

#arhab

Problem has been solved !! The problem was that in the Modem / TTY / NanoIO settings the NanoKeyer was connected, which I use for CW. The RTTY modem thought it should broadcast RTTY using NanoIO by FS

#arhab

Yes USB-D in the IC7300 W dniu 2018-09-27 o 21:16, Michael Black via Groups.Io pisze:

#arhab