|
Re: FLDigi in LSB mode
When I downloaded the then latest alpha of flrig, AVG wanted to send both the installer and the installed flrig away for further analysis. I overrode both without a problem. When my licenses run out I am going to try Windows Defender instead. Mind you on another machine Defender moaned about them occasionally.
73 Phil GM3ZZA.
Sent from Mail for Windows 10
From: Rodney via groups.io
Sent: 11 January 2021 09:56 To: winfldigi@groups.io Subject: Re: [winfldigi] FLDigi in LSB mode
Dave,
|
|
|
|
Re: FLDigi in LSB mode
Rodney
Dave,
I was able to download the two programs without the "message". Thanks - 73, Rodney - N3QLB
|
|
|
|
Re: Carrier before data sent
#fldigi
Doug,
toggle quoted messageShow quoted text
For my Icom IC-7300 I use either Hamlib or Flrig. The FT-DX5000 is listed in the drop downs so it should work. Make sure that you have the correct driver from Yaesu and the other settings like the baud rate matches the radio settings. Maybe someone with that radio can share their settings. 73, Ron NY3J On 1/10/21 8:29 PM, DOUGLAS FRIEDT via
groups.io wrote:
Hi Ron,
|
|
|
|
Re: Carrier before data sent
#fldigi
DOUGLAS FRIEDT
Hi Ron,
toggle quoted messageShow quoted text
Thank you very much, that was the fix! Might I ask another question? I also have an FT-DX5000 and have been able to get it to work with HRD and SDR UNO, but can’t get it to work with fldigi. I set it up just like the FT-991, but used the profile for the 5000. I suspect it is something with the menu settings in the 5000, but I have not found any setups for it on the internet. Thanks again, and take care Doug N8FRJ
On Jan 10, 2021, at 12:49 PM, Ron NY3J via groups.io <rwenig@...> wrote:
|
|
|
|
Re: FLDigi in LSB mode
Rodney
Dave,
I am trying to download the setup.exe for flrig and fldigi but I am getting "can't be downloaded securely" message. I have tried this within groups.io and also the email. Same message. I do have the option to keep, but I want to make sure that it is ok. I am using Google Chrome. Thanks, Rodney - N3QLB
|
|
|
|
Re: FLDigi in LSB mode
Kenneth G. Gordon
On 10 Jan 2021 at 11:00, Dave wrote:
Just my opinion, but virus protection software is like buying arsonAgreed. In addition, McAfee and Norton's are notorious for false-positives. I was an IT Pro at the University of Idaho for over 30 years. At one time, Norton's even "decided" that MS-Word was a virus. Ken W7EKB
|
|
|
|
Re: MinGW Runtime Assertion - Assertion failed
Thank you both for your
reports of successful trouble shooting. The usual cause of the
error is a device driver that is not responding iaw
specifications.
toggle quoted messageShow quoted text
David On 1/10/21 4:19 PM, NoName via
groups.io wrote:
|
|
|
|
Re: MinGW Runtime Assertion - Assertion failed
NoName
Good fix here too. I have a virtual audio device associated with another software package that when disabled allows fldigi to start up error free. Thanks to Greg for posting what you found! Chris ---------------------------------------- In God We Trust All who call on the name of the Lord will be saved - Romans 10:13 A Prudent man sees danger and takes refuge, but the simple keep going and suffer for it - Proverbs 22:3 On 1/10/2021 11:57 AM, Greg Hidley via
groups.io wrote:
Solved the problem! It was a sound card interfering ... in my case it turned out to be "C-Media PCI Audio Device". Disabling it allowed fldigi to startup error free.
|
|
|
|
Re: Need some help
Your recommendation solved the problem! It was a sound card interfering ... in my case it turned out to be "C-Media PCI Audio Device". Disabling it allowed fldigi to startup error free.
Did this by opening device manager, opening sound devices, and go down the list disabling one at a time until you find the culprit. Obviously you should not disable the sound card device that fldigi is set use! In my case, I was fortunately not using the C-Media device. greg
|
|
|
|
Re: FLDigi in LSB mode
Philip Salley
LOL Dave, couldn't have said it better. Regards, Phil / K4PO
|
|
|
|
Re: MinGW Runtime Assertion - Assertion failed
Solved the problem! It was a sound card interfering ... in my case it turned out to be "C-Media PCI Audio Device". Disabling it allowed fldigi to startup error free.
Did this by opening device manager, opening sound devices, and go down the list disabling one at a time until you find the culprit. Obviously you should not disable the sound card device that fldigi is set use! In my case, I was fortunately not using the C-Media device. greg
|
|
|
|
log data question
jim crisco WA4YIZ
hi all...
have not been on fldigi for a while...just updated to latest...
used to...when i clicked on a call in rt panel..would place call in
field at top...and would add state...county...location-grid...etc..
does not load that data now...
also..i and sending each log to ACL
have i missed something..??
thanks
jim
wa4yiz
 
|
|
|
|
Re: http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
I'll check the help source
files.
toggle quoted messageShow quoted text
Dave On 1/9/21 12:21 PM, Tom - K5EIS via
groups.io wrote:
Hi Dave; The subject "FT991a how to page" apparently contains an invalid picture link as follows: flirig-fldigi.png since no picture displays for it. Probably the extra "i" between "fl" and "rig". Thought you might like to know about it and correct it.
|
|
|
|
Re: http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
Not seeing that in the Wiki:
toggle quoted messageShow quoted text
 Dave On 1/9/21 12:21 PM, Tom - K5EIS via
groups.io wrote:
Hi Dave; The subject "FT991a how to page" apparently contains an invalid picture link as follows: flirig-fldigi.png since no picture displays for it. Probably the extra "i" between "fl" and "rig". Thought you might like to know about it and correct it.
|
|
|
|
Re: Carrier before data sent
#fldigi
Doug,
toggle quoted messageShow quoted text
Check the setting in Configure, IDs, RsID, Pre-Signal Tone. This will send a tone before the data is sent. Set it to zero for no tone.  73, Ron NY3J On 1/10/21 10:37 AM, DOUGLAS FRIEDT via
groups.io wrote:
Good Morning
|
|
|
|
Carrier before data sent
#fldigi
DOUGLAS FRIEDT
Good Morning
I started using fldigi about a month ago with an FT-991. When I transmit in RTTY, CW or PSK, there is a four second carrier before any data is sent. I am using a PC with an i7 chip 2.2Ghz, 6 cores and 16GB of RAM. I close all applications except fldigi so as not to overburden the processor. I have not found any settings to adjust. Any help would be greatly appreciated. Thanks Doug N8FRJ
|
|
|
|
http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
Hi Dave;
The subject "FT991a how to page" apparently contains an invalid picture link as follows: flirig-fldigi.png since no picture displays for it. Probably the extra "i" between "fl" and "rig". Thought you might like to know about it and correct it.
|
|
|
|
Re: FLDigi in LSB mode
Just my opinion, but virus
protection software is like buying arson insurance from the
mafia.
toggle quoted messageShow quoted text
Dave On 1/10/21 10:49 AM, Rory Bowers wrote:
|
|
|
|
Re: FLDigi in LSB mode
Rory Bowers <k6cks01@...>
The links posted in your email... don't know why they are bouncing but Chrome refuses to go to the site. Hmmm. I wonder if my McAfee is preventing it? No biggie Dave, like I said I know where to find it. 73, Rory, K5CKS
On Sun, Jan 10, 2021 at 10:46 AM Dave <w1hkj@...> wrote:
|
|
|
|
Re: FLDigi in LSB mode
I can open the links from the
winfldigi.groups.io page. Which one(s) are giving you trouble?
Did you refresh your browser page?
toggle quoted messageShow quoted text
Dave On 1/10/21 10:40 AM, Rory Bowers wrote:
|
|
|
