|
Re: New feature for FLDIGI or N1MM
Cable Television
Thanks for getting back to me. I beleive text to speach would be a great enhancement and open doors for physically challenged hams. Younger hams may not realize yet what impairments await them as they age. Being able to control the rig and use CW, RTTY and digital modes via speech would help many hams remain active in the hobby as they age and open the door to other physically challenged individuals. I would hope that someone would take on this challenge allowing it to become the next great enhancement. Thank you again for your response! Jeff, WA3TD
It would be possible to do this, but I doubt you'd do it with less than a powerful processor.
|
||||
|
|
||||
|
Re: New feature for FLDIGI or N1MM
n7wy
It would be possible to do this, but I doubt you'd do it with less than a powerful processor.
Where i worked we used Nuance Speech Objects; they are the basis for the SIRI recognition engine at Apple. You'd have to build a recognition dictionary of commonly used ham radio words, the phonetic alphabet, perhaps even a few call signs you'd expect to hear. Another alternative to Nuance's product is AT&T's Watson (yes, it has the same name as the IBM supercomputers). I do not know if they would license it. I have no idea what the per seat licensing charges would be. Bob R - N7WY
|
||||
|
|
||||
|
Fldigi 4.1.17 stops sometimes automatically on Mac OS Catalina
Maurice PC9T
I'am using Fldigi 4.1.17 on my MacBook Pro with Catalina an RumlogNG and sometimes Fldigi stops automatically even when TX is not in transmit mode.
Sometimes 3 to 4 times or more in a hour. Last December I had a clean setup with Catalina after lots of problems on BigSur. But now this strange effect happens often, does anyone recognize this problem and has solved the problem. I think it's no RFI because it happens also when Fldigi is in receive. It happens also when using Fldigi without RumlogNG, I did severals clean installs but the problem remains. I hope for a solution because it's not handy when you're contesting and the program stops. Hope not to have go back to a windows computer
|
||||
|
|
||||
|
comptty 1.0.2.01 posted
at
http://www.w1hkj.com/alpha/comptty/
BigSur dmg's at
http://www.w1hkj.com/bigsur/
73, David, W1HKJ
|
||||
|
|
||||
|
comptext 1.0.2.01 posted
at
http://www.w1hkj.com/alpha/comptext/
BigSur dmg at
http://www.w1hkj.com/bigsur/
73, David, W1HKJ
|
||||
|
|
||||
|
Re: [nbems] flcluster 1.0.5 posted
Cliff
Builds in MacOS High Sierra and runs on Mojave.
toggle quoted messageShow quoted text
73,
Cliff, AE5ZA
|
||||
|
|
||||
|
Re: [nbems] flcluster 1.0.5 posted
Ed W3NR
On 1/16/21 10:35 AM, Dave wrote:
at http://www.w1hkj.com/files/flcluster/
Built fine on Mint 20.1 Ed W3NR
|
||||
|
|
||||
|
flcluster 1.0.5 posted
at
http://www.w1hkj.com/files/flcluster/
and at Source Forge. Sat Jan 16 06:58:31 2021 -0600
Version 1.0.5
* Maintenance release
* Remove -lregex from mingw build scripts
warnings
* Fix various compiler warnings
FLTK 1.4
* Change m4 script to test for >= version 1.4
* Remove reference to Surface device
UTF-8 strings
* strip UTF-8 BOM characters from pasted strings
73, David, W1HKJ
|
||||
|
|
||||
|
New feature for FLDIGI or N1MM
Cable Television
Has anyone considered adding a new feature consisting of speech to text function to FLDIGI or N1MM?
I think that would be way cool! Tnx 73 WA3TD
|
||||
|
|
||||
|
Re: http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
DOUGLAS FRIEDT
Thanks very much, have a good weekend and be well
toggle quoted messageShow quoted text
Doug N8FRJ
On Jan 15, 2021, at 9:32 AM, Tom - K5EIS via groups.io <k5eis@...> wrote:
|
||||
|
|
||||
|
Re: http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
Hi Doug. Sorry, but I am only familiar with the FT-991A, and can't help with the FT-991. I only know there are similarities, but that is the extent of my knowledge about them. This post was primarily about a screen capture not displaying in the FLRIG help webpages for the FT-991A. I suggest you should search the FT-991 or FT-991A or Yaesu groupsio groups. Good luck.
|
||||
|
|
||||
|
Re: http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
DOUGLAS FRIEDT
Hi Tom, thanks for sharing. Is there anything similar that you are aware for the FT-991?
toggle quoted messageShow quoted text
Take care 73 Doug N8FRJ
On Jan 14, 2021, at 9:51 AM, Tom - K5EIS via groups.io <k5eis@...> wrote:
|
||||
|
|
||||
|
Re: http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
It is off the help of the FLDIGI website (not the wiki). Following is a link to the exact page:
http://www.w1hkj.com/flrig-help/ft991a_how_to_page.html
|
||||
|
|
||||
|
Re: log data question
Cliff
Jim,
toggle quoted messageShow quoted text
The auto lookup is done from your log. If the call is not in the Log it will not auto fill the logging fields. The lookup for QRZ needs a paid subscription to work for remote lookup. If you have one then clicking on the “world” icon beside the call in the log field should do the look up for you. HamQTH is free, but not as current as QRZ and Callook is also free, but USA only. Enter the call into the logging area by clicking on the call in the Rx Panel. 
73,
Cliff, AE5ZA
|
||||
|
|
||||
|
Re: log data question
right click on the call (in
Rx panel) and select lookup.
toggle quoted messageShow quoted text
David On 1/12/21 8:26 AM, jim crisco WA4YIZ
via groups.io wrote:
|
||||
|
|
||||
|
log data question
jim crisco WA4YIZ
forgot to add... if i click on the "qrz" button..it does fill the missing fields.
cannot find any info in the user guide to select
"auto fill"
thanks in advance
73
jim
wa4yiz
|
||||
|
|
||||
|
Re: [SOLVED] Re: [winfldigi] {winfldigi] MACRO not performing as advertised in User manual 3.21
You are welcome Andy. You
are little too far west to be a "Maniac". You would have to be
a reclusive down-easter using the term as a description of
yourself (never by another person). 😉.
toggle quoted messageShow quoted text
Dave On 1/12/21 6:56 AM, Andy_VE4PER wrote:
|
||||
|
|
||||
|
[SOLVED] Re: [winfldigi] {winfldigi] MACRO not performing as advertised in User manual 3.21
Andy_VE4PER <andrew.webb.501.ve4per@...>
Thanks for all the assistance here in this group on this matter. I have managed to get it all working satisfactorily now. Now functions to send code practice 5 ascii char cipher groups (optionally 24 - 480 groups) at 10, 15,20, 25, 30, 35, & 40 wpm with extra plain language, punctuation and common amateur Q-codes also using same stepped speeds. Thanks again, sorry if I seemed a pestering maniac. 73 Gud DX Stay Safe Andy ve4per
On 2021-01-12 4:06 a.m., Andy_VE4PER
via groups.io wrote:
|
||||
|
|
||||
|
Re: Rig Filter Control
Cliff
Yes, you are correct Harris, I should have said flrig can change the filter number as well as BW where RigCat is only BW.
toggle quoted messageShow quoted text
73,
Cliff, AE5ZA
|
||||
|
|
||||
|
Re: {winfldigi] MACRO not performing as advertised in User manual 3.21
Andy_VE4PER <andrew.webb.501.ve4per@...>
P. 306 has same type example wrt use of <FILE: tag syntax. <!WPM:5:15><!IDLE:2><FILE:/home/dave/fldigi.ft950/scripts/practice-5wpm.txt> using this exact syntax except substituting my own userid for
your "Dave" and my ".fldigi" folder name for your "fldigi" folder
name it transmits the contents of the file now. I need to get it to use the modem control tag to set the sidetone
freq of the transmission rather than shift the actual transmission
frequency as it does now. But thanks for new ref manual Dave it appears to have me one step
closer to what I am seeking. On 2021-01-11 8:50 p.m., Dave wrote:
I notice that you are referencing user manual for version 3.21. That is at least 3 years out of date. The current on-line manual is at http://www.w1hkj.com/FldigiHelp/, and the pdf is at: fldigi_4.1.17-help.pdf
|
||||
|
|
