As it was explained to me in a while ago when I was having a similar problem/question with a similar problem that you are experiencing --- this may have provide some basic explanation on

Another way to skin the cat. Glad you figured out a way to do it. 73, Cliff, AE5ZA

Well, I’m really not good at this computer stuff, not in my skill set at all. So this is crude as all heck, but SCOTT is the wizard! I wish I was better at Photo-Shop! Vy73 – Mike

Ah ha. That would definitely reset the timer, but it would also send DE K9JB twice. I discovered that if I hit the Pause key twice it toggles TX off and back on and resets the timer. I believe Dave

Just realized that your question was all within one macro. I haven't tried that, but my intent was for you to hit the same macro button twice, not an all in one macro. 73, Cliff, AE5ZA

Yes, there is or was a macro button already defined as that command. 73, Cliff, AE5ZA

Cliff, I think this is what you’re saying is: DE K9JB <TX/RX><TX/RX>. Is that correct? 73, Jerry K9JB

Behind the curtain is a wizened little old man doing magic things. Glad you have the solution in hand. 73, David, W1HKJ On 3/22/22 13:46, Stanford

I have been trying to put my IC-7700 into DATA 3 mode because it is set to "LAN" and must be in that mode to transmit. I had to go to the IC-7700 and push the "DATA" button to get to DATA3. I had to

Jerry, Just hit the T/R toggle macro twice. First hit goes back to Rx and the second puts it back in Tx. Pretty simple. It's already in your default macros unless you've changed it. I think it

That’s what I’m trying to do except its <RX><TX>. Can I call a macro from a different macro? I couldn’t find it on the list. Jerry K9JB

ONE <TX> and ONE <RX> per macro. On 3/22/22 09:21, K9JB wrote:

If I have a macro: DE K9JB <RX><TX> to go from transmit to receive back to transmit, it ignores the <TX> command and leaves the program in receive. If I write a macro <TX> then switch off the

From my side tnx a lot to all of you for support. If I'm allowed to make a wish: -- change/option to persist S# from session to session (keep the last number when you start fldigi as default

That's good to hear. I'm sure Dave saw your email so maybe he will put it on his list. 73, Cliff, AE5ZA

A) Split function coming "on". I followed your directions, I found those options checked after UNcheck --> problem solved!!! B1) Extra lines and corrupted line at bottom of .mat file I

Ok, tnx so much. I will do what you suggest and let you know. 73

Ok, I think I understand some of what is going on. Yes the new mode table was added so you will need to change the mode in the mat file to agree with the new table. No choice there. I suggest you use

Cliff, first of all -- tnx for your patience in helping me. -- tnx to the sw developer for sharing for free this great tool Now... I have tried to do as you suggest - no success. A couple of picture

It is very strange that you have problems with the mat file in the new versions of flrig. The same mat file here works in all versions. I suggest that you rename the C:\Users\<login>\flrig.files to