http://www.w1hkj.com/alpha/fldigi/ FSKconfig.png 2022-01-09 14:23 54K

If the number is a valid RST(Q) then it should default to the RST RCVD control. David On 1/9/22 12:11, Fred K2DFC via groups.io wrote:

Yes ED I have that. And the sent and received RST boxes are prefilled with 599. But the number still goes into the RST SENT box 50% of the time. And that's the strange part, not all the time, just

In the contest configuration, check the Always 59/599. Should solve the problem. Ed W3NR

Thanks Larry. BTW, we had a QSO in the contest. Fred K2DFC

Your rig mode should always be in USB. That includes 80 and 40 meters. Fred K2DFC

It happens to me as well. IF it looks like an RST number it will go there. Rather than left click, right click and pick the destination. Larry / W1DYJ

Hi Jim. Is the person reporting this to you the only contact you have tried? because based on your screen, since you have decoded someone you would be on the same mode as them. I am not a huge RTTY op

Cannot duplicate here Ed W3NR

Using the FLDIGI 4.1.20.36 in the RTTY RU contest. Also logging using the N3FJP RTTY RU software 3.9.1. Every time I work a station in TN it originally puts TN in the State box in the N3FJP Logger,

I'm in the ARRL RTTY contest and when ever I answer a CQ I'm told that my signal isn't decoding. One guy suggested that I'm not in the correct band mode. I'm running Fldigi 4.1.20 on a K3 with Win

Upon further investigation I find the serial number going in the RST SENT box. Again about 50% of the time. Just had to go back and fix my log. Anyone else have this happen?

When working a DX station the Serial number received doesn't always move to the SER box. when clicked on. Maybe 50% of the time. Typing it in is also frustrating. A three digit number can only be

Thanks Dave! Butch, KF4HR

Uncheck the "Audible BELL" control. David On 1/8/22 21:51, kf4hr3 via groups.io wrote:

Is there a way to disable the RTTY "Bell" sound? KF4HR

Already tested before posting here with latest alpha release, same issue with Pseudo-FSK as described. I have built a pseudo-FSK circuit so I'm not interested at the moment to FSK settings, by the way

Phil, One thing I notice is that you are using a very old version of fldigi. I suggest you get the latest from here and see what your results are.

The current code design is for US keyboard caps conversion. static char letters[32] = { '\0', 'E', '\n', 'A', ' ', 'S', 'I',

Thanks for the reply Cliff but sorry, probably I've not explained myself in a clear way. I know about QSY and mark frequency, the issue here is the visualisation on the waterfall of a trasmission