Michael, I’m not sure how Windows does it, but check out the online help or the PDF help file and see there. I’m sure it’s explained how to do it in there. It works, you just have to see how

I'm trying to set up the autostart to launch flamp and flmsg when I start fldigi. I go to Configure>Config Dialog then Configure>Misc>Autostart Then I click in the box for flamp, click the Locate

Spent many hours today trying to make it work with VOX, but no go for RX. Simply set it up as a USB pnp device for mic and speakers and made sure the WIN 10 sound volume levels were up and still

After 19 or so years of RTTY contesting. using AFC means you are going to chase people all over the band. Let them come to you. If you are going to S&P then turn AFC on, but I have better luck with

Ok. Well it was worth a try. Hopefully some one else will have the answer. I know a number have encountered it and AFAIK have worked it out. 73, Cliff, AE5ZA

Hi Cliff, I installed the latest alpha (f.1.18.10) - it didn't help. 73 Dennis W7DRW

Im trying to setup a signalink with a yaesu 1500m for vhf fun running linux debian 9. In fldigi the rig is not found no file for ft-1500m , what do you use for settings then? Any help would be

In response to multiple comments here on Winfldigi I asked the ACLog group and recieved the below response from Scott, N3FJP. It will hopefully help next contest where we need to send a serial

In response to multiple comments here on Winfldigi I asked the ACLog group and recieved the below response from Scott, N3FJP. It will hopefully help next contest where we need to send a serial

During the recent CQ WPX RTTY contest I found AFC of little use. It would not track on the upper bands hardly at all, on 40 and 80 is did some but was less robust than I expected. It would not tune to

I just had the same problem with N3FJP Contest Logger for CQ WPX. This was my first time using this logging program and FLdigi.

Hi Everyone, For a long time I have used the SignaLink interface for FLdigi and it’s worked well. Decided to try the DRA-70 from Maters Communications, it offers hard PTT but also uses VOX as

Thanks Cliff, I'll give the alpha a try - can't hurt hihi Hi Bob, I am running the latest win10 version. I do not have Zoom or Audacity on the ham computer. Fldigi used to run fine, I simply don't

worked like a charm Cliff. Thats what I was looking for Thanks so much -- 73 NU4N Dave

I am using IC-7300 rig with Linux ubuntu 20.04LTS OS. It all works fine with JTDX and WSJT-X as well as FLDigi in BPSK31 modes as long as the dropdown below the frequency display window is

If you mean what you see on the waterfall then go to the Configuration tree and open Waterfall and select FFT Processing. The top row has upper and lower values you can change. 73, Cliff, AE5ZA

I am running Windows 10 Pro 64 bit on an HP 6930P laptop. I allow Windows to perform and install updates automatically. I also run AVG {paid subscription} for virus and malware protection. I've

Is there any way to narrow to band width in the Waterfall? -- 73 NU4N Dave

Dennis, Give the latest alpha a try. Some changes have been made that may solve your problem. http://www.w1hkj.com/alpha/fldigi/ 73, Cliff, AE5ZA

Hi Cliff, I am using the latest fldigi and flrig 73, Dennis W7DRW