Cliff Thanks! I’ll give it a try. Joel AC8WS

Joel, FYI, if you want a really clean signal when using PSK31 the ALC needs to be zero. It is very sensitive to non-linearity. Some of the other modes are not quite so sensitive, but it’s always

OK Thanks Dave, I just was wondering why as It used to connect as in 4.0.9. and Scott said the API is the same for all. Thanks Larry N8CWU On 12/5/2020 7:56 PM, Dave

This is the list of supported N3FJP logbook / contest programs: Amateur Contact Log Africa All-Mode International ARRL Field Day

I’ve found CWget to be the most accurate.

Mike If you are using Windows go to your speaker/audio codec and reduce the volume until the ALC is in the middle during transmit. I don’t have a 705 but for FLDigi on the 7300 go to rig

Mike, Set the rig’s power to 100% and reduce the audio drive to get the 5 watts you want. I suspect the way you’re doing it you limit the power out, but you’re probably blasting the input to the

Hugo, Just click on any of the digits, not necessarily the left most and then type in the freq you want. That way no issue with getting into the blank area. 73, Cliff, AE5ZA

Hi, Not sure how to get the ALC lowered with my ic705. It is pegged out when I transmit during PSK31. Have output power set to 5 watts. Also any suggestions on how to properly setup the ic 705 with

Barry et al: Well some of that sort of works. Since my radio, as my choice uses a 800 Hz sidetone which prefer for CW, if I should click on the waterfall at 1500 Hz, yes from the

Now that is very strange... TOUCH-TONE CW I've been operating CW for decades, and I have never heard on an HF band a "two-tone" CW signal. As far as I know, the left/right channel with FLDIGI

Hi Bob K4TAX I think that sending CW by keying an audio pitch with the rig in USB (or LSB) will generate a perfectly adequate CW signal. After all, this is not different from generating a PSK31

I've heard a few stations sending "touch-tone" CW (multiple tones), and I suspect they're running tones directly into their mic jack.  I've sent a few of them a note asking how their station is

Well it seems that there is little interest. I find all the CW decoders out there lacking. Even the best make a lot more errors on real off the air poorly formed signals than I do and I am no so

Dave, thanks for the clarification and, yes, that works but one has to be careful. Clicking on the low area of a blank space to the left will fill that space automatically with a "4" and then start

Jens, In HOME/.fldigi/ try renaming fldigi.prefs to fldigi.prefs.old and see if it will start. If not then also rename fldigi_def.xml and start fldigi. I suspect it will start just fine. You’ll have

Hi all, 4.1.15 is working ok on my machine. Today I installed 4.1.17 on my Macbook still being on Catalina. As one can see, segmentation fault... Any help would be welcome... Kind regards, Jens

No idea what got changed or how, but changed ports on DXKeeper, the Gateway and other apps to 52000 and all is well! Tnx es 73 Dave - K1DJE

Barry: There are efforts on-going by Dave, W1HKS, to provide other means to send CW via the keyboard. The brands and models of radios is being expanded. Presently testing is

I have been playing with this for a few weeks now, more as something to do in COVID time than out of necessity. It is fun, but why re-invite the entire wheel? This one has been fantastic and the