|
Re: fldigi-DxLabs gateway
Murf..
I replied to your message in the DXLabs group. Follow it and send me the debug file so I can see what is going on..
73 Rick N2AMG
Murf..
I replied to your message in the DXLabs group. Follow it and send me the debug file so I can see what is going on..
73 Rick N2AMG
|
By
Rick Ellison
·
#28243
·
|
|
Re: Assertion Failed error help me!
fldigi 4.1.17 contains no changes in the audio interface code. What version of fldigi were you previously using?
This error is usually an indication that a recent
fldigi 4.1.17 contains no changes in the audio interface code. What version of fldigi were you previously using?
This error is usually an indication that a recent
|
By
Dave
·
#28242
·
|
|
Re: New version of AndFlmsg: V1.4.2
Hello Brian,
1) Since AndFlmsg is designed for exchange of formatted messages that are sent in one block of data there was no need to program the backspace.
Also for unformatted text exchanges, the
Hello Brian,
1) Since AndFlmsg is designed for exchange of formatted messages that are sent in one block of data there was no need to program the backspace.
Also for unformatted text exchanges, the
|
By
John (vk2eta)
·
#28241
·
|
|
fldigi cw
Hello all.
loving the new cw interface..freed up up usb
port for me not having to us the dtr keying.
what i have noticed is on the one of the latest up dates
is the cq timing is off for the space
Hello all.
loving the new cw interface..freed up up usb
port for me not having to us the dtr keying.
what i have noticed is on the one of the latest up dates
is the cq timing is off for the space
|
By
Pat
·
#28240
·
|
|
Re: FLDIGI connecting to N3FJP ARRL 160 Meter Contest Log
Version 4.0.9 does connect
Version 4.0.9 does connect
|
By
Larry Krist
·
#28236
·
|
|
FLDIGI connecting to N3FJP ARRL 160 Meter Contest Log
Anyone having trouble getting the new FLDIGI 4.1.17 to connect VIA API to the N3FJP 160 Meter Contest Logger? I cannot get it to connect to it. I get this from the response and it will not
Anyone having trouble getting the new FLDIGI 4.1.17 to connect VIA API to the N3FJP 160 Meter Contest Logger? I cannot get it to connect to it. I get this from the response and it will not
|
By
Larry Krist
·
#28235
·
|
|
Re: FLRig freq entry limit
#flrig
You can also set the frequency at the xcvr and save save that frequency in flrig's "Memory" bank for later recall.
David
On 12/3/20 10:28 AM, VE3KTN wrote:
You can also set the frequency at the xcvr and save save that frequency in flrig's "Memory" bank for later recall.
David
On 12/3/20 10:28 AM, VE3KTN wrote:
|
By
Dave
·
#28234
·
|
|
Re: FLRig freq entry limit
#flrig
You are hitting a band limit value Hugo. Click any digit on the frequency control. Then enter your target frequency (in KiloHertz) using the keyboard. The Enter key for end of
You are hitting a band limit value Hugo. Click any digit on the frequency control. Then enter your target frequency (in KiloHertz) using the keyboard. The Enter key for end of
|
By
Dave
·
#28233
·
|
|
Re: New version of AndFlmsg: V1.4.2
This is great! I just installed AndFlmsg on my phone today and was able to decode images and text! Questions about BPSK31, 1) (this may be an fldigi thing) but I'm not seeing the recognition of
This is great! I just installed AndFlmsg on my phone today and was able to decode images and text! Questions about BPSK31, 1) (this may be an fldigi thing) but I'm not seeing the recognition of
|
By
Brian Garber
·
#28232
·
|
|
Assertion Failed error help me!
Hi friend,
i have this problem on my PC windows 10 x64 with last release of FLdigi, can I help me to resolte it?
Best 73 de IZ7AUH
Hi friend,
i have this problem on my PC windows 10 x64 with last release of FLdigi, can I help me to resolte it?
Best 73 de IZ7AUH
|
By
Frank IZ7AUH
·
#28231
·
|
|
FLRig freq entry limit
#flrig
First off, I'd like to thank everyone on the FL-suite team for continuing to make the products better. It's one of the most useful and user-friendly pieces of software I have for ham radio.
Now, to
First off, I'd like to thank everyone on the FL-suite team for continuing to make the products better. It's one of the most useful and user-friendly pieces of software I have for ham radio.
Now, to
|
By
VE3KTN
·
#28230
·
|
|
RSID crashing 4.1.17
#rsid
Just wondering if anyone is experiencing an issue with RSID freezing up ver 4.1.17.
73, Brian WB8AM
Just wondering if anyone is experiencing an issue with RSID freezing up ver 4.1.17.
73, Brian WB8AM
|
By
Brian Garber
·
#28229
·
|
|
Re: Matched set fldigi / flrig alpha suite; new flrig alpha
The software is not polling for changes in WPM made at the transceiver.
David
On 12/1/20 8:01 PM, Bob McGraw - K4TAX wrote:
The software is not polling for changes in WPM made at the transceiver.
David
On 12/1/20 8:01 PM, Bob McGraw - K4TAX wrote:
|
By
Dave
·
#28228
·
|
|
fldigi 4.1.17 / flrig 1.3.53 posted at
http://www.w1hkj.com/files/fldigi/
fldigi-4.1.17.tar.gz
fldigi-4.1.17_i386.dmg
fldigi-4.1.17_setup.exe
http://www.w1hkj.com/files/fldigi/
fldigi-4.1.17.tar.gz
fldigi-4.1.17_i386.dmg
fldigi-4.1.17_setup.exe
|
By
Dave
·
#28227
·
|
|
New version of AndFlmsg: V1.4.2
Posted at http://www.w1hkj.com/files/AndFlmsg/
AndFlmsg - Flmsg with Fldigi Modems on Android - User_s Manual V-1.4.2.pdf
Posted at http://www.w1hkj.com/files/AndFlmsg/
AndFlmsg - Flmsg with Fldigi Modems on Android - User_s Manual V-1.4.2.pdf
|
By
Dave
·
#28226
·
|
|
Re: Omni V rig control
Don,
You can try the attached. The TT563 0x04 code has been replaced with the TT562 0x1E code.
David
On 12/1/20 11:42 AM, Don wrote:
Don,
You can try the attached. The TT563 0x04 code has been replaced with the TT562 0x1E code.
David
On 12/1/20 11:42 AM, Don wrote:
|
By
Dave
·
#28225
·
|
|
Re: Dave's RATPAC Presentation
If you only want the power point files they are here in both MS and LibreOffice format:
http://www.w1hkj.com/lectures/
73, David, W1HKJ
On 12/1/20
If you only want the power point files they are here in both MS and LibreOffice format:
http://www.w1hkj.com/lectures/
73, David, W1HKJ
On 12/1/20
|
By
Dave
·
#28224
·
|
|
How to setup to make fldigi decode the CW signal heard on the IC-7300 (I would like the rig's tuning knob to select frequency)
#fldigi
I want to restart operating in CW and was searching for a CW decoder for backup if I do not get everything right. fldigi works fine, but I was not able to find the settings that fldigi follows my
I want to restart operating in CW and was searching for a CW decoder for backup if I do not get everything right. fldigi works fine, but I was not able to find the settings that fldigi follows my
|
By
sensorsiot@...
·
#28223
·
|
|
Re: Matched set fldigi / flrig alpha suite; new flrig alpha
Dave et al:
I've been using 16.14 most of the afternoon and evening with my Elecraft K3S. No issues noted.
I have noticed, and don't recall seeing this in the released
Dave et al:
I've been using 16.14 most of the afternoon and evening with my Elecraft K3S. No issues noted.
I have noticed, and don't recall seeing this in the released
|
By
Bob McGraw - K4TAX <rmcgraw@...>
·
#28222
·
|
|
Matched set fldigi / flrig alpha suite; new flrig alpha
Remember that these are a matched pair if you are testing CAT CW using text strings:
at http://www.w1hkj.com/alpha/fldigi/
fldigi-4.1.16.14.tar.gz
Remember that these are a matched pair if you are testing CAT CW using text strings:
at http://www.w1hkj.com/alpha/fldigi/
fldigi-4.1.16.14.tar.gz
|
By
Dave
·
#28221
·
|