Jay, Did you close both flrig and fldigi and then just open flrig? My first thought is that something, like hamlib in fldigi already has the com port tied up. If that doesn’t work then after closing

Well, I feel like an idiot. I've spent days trying to link flrig (1.3.49) with my KX3 and fldigi (4.1.09) on my Win 10, 64 bit laptop with no success. The KX3 and fldigi have been running great using

Nope. Just had a thought. I need to recheck port 1 on the WK to see if it works CW (with or without fldigi). Then I'll know for sure what the problem is. :) Ready for the contest tomorrow!! -- 73,

Bo, You can select either Key1 or Key2 in the WinKeyer setup in Fldigi. 73, Ron NY3J On 2/13/20 1:55 PM, Bo W4GHV wrote:

Solution found! It works perfectly only if the rig CW line is connected to KEY 2 on the Winkeyer Bring on the CW contest!! IC-7610, fldigi (both in CW mode), Winkeyer, N3FJP logger, and the life saver

Bo, Go to C:/Users/<login-name>/and delete/rename the fldigi.files directory. That will get rig of all the fldigi configuration files as if it had never been installed before. 73, Cliff, AE5ZA

NOPE! :( Removed and re-installed to 4.1.09. Completely re-wrote the macros, looked at them in a text editor and THEY ALL SPIT OUT THE LAST 5 CHARACTERS after the K <RX> with and without a \n

Glad to hear you got things ironed out. Enjoy! 73, Cliff, AE5ZA

Thanks for the response. I've noted as I age I get confused a lot more. I learned a lot and took notes this time. I think I've ironed everything out. 73, Bo -- 73, Bo W4GHV since '54

Thanks, Dave!

From the on-line fldigi manual DominoEX The modem code for dominoEX uses a wide band multiple frequency detector that can lock on and detect the incoming

I was using Domex 8, a little while ago, and noticed some I hadn't noticed before. What is the "box" between the S/N and IMD area and the TX attenuator controls used for? what caught my attention was

IT WAS THE COMPUTER. NOT ME OR THE SOFTWARE! I moved the macros to another computer and the problems are gone. I'll reload the software and make sure the old is gone and I should be good to go. CW

Try it with fldigi in a window that is not maximized. Haris SV1GRB Στις Δευ, 10 Φεβ 2020 στις 6:09 μ.μ., ο/η Al Massaro <almassaro1@...> έγραψε:

Win7 home premium 64 bit 2Ghz machine, FLDIGI 4.0.18 No Joy Al M KF5SMH

Yes thanks Bo, I had tried <LOG> with and without additional fields on the end; same result here. I also started a new log and put the radio into a dummy load @5W so I could simulate the contest. The

Aha, it wasn't me!!! I had strange probems but worked around it. First I need to find the differences between SERNO and CNTR . There IS a difference. The INCR only works on the CNTR. The

fldigi can be resized if viewing is difficult for a person who is sight disabled. This technique is primarily for Windows. I have tested only on Windows 7. Select fldigi as the active

I have been using FLDIGI 4.1.09.18 in the CQ WPX contest and have been experiencing macros that repeat by them selves every once and a while. Has anyone else seen this happen? Thanks, Larry 

I have found that every time FLDIGI is closed and reopened, I have to go to the contest screen and reset the counter to the proper number that N3FJP is at, it will show the proper number in