I just installed Fldigi 4.0.18 on a Windows 10 PC. The radio is Yaesu FT-991a. Pretty much everything is working. BUT: when I startup Fldidi, it sets the "lock" mode on my radio. That makes it

I am all new to this. Downloaded and installed fldigi. The fldigi box was "grey tick", while the other components were normal solid black ticks, on installer. It said successful install. But, did not

Can you see if the transmitting station is sending the ID sig at the beginning? Many stations don’t send any ID signal so RxID won’t be able to identify the signal. 73, Cliff, AE5ZA

Fixed it. Thanks. 73/gus kr4k

I just installed the latest FLDIGI release onto my XP laptop. The first time I started it up, the RDIX and TXID seemed to be working fine, I was able to Identify an Olivia transmission as well as an

Gus, Most likely there is some issue with config files. Go to Users/Login Name/files.fldigi and rename the two config files, fldigi_def.xml and fldigi.prefs. Then start fldigi and set it up

I've had this problem when the connected USB sound card is a different type than what it was the last time fldigi was closed on the same computer. Paul, ad7i

Installed 4.0.18 on Win 10 ver 18-09. FLDIGI opens, looks OK, but immediately closes. Ran as administrator, but get same results. Any idea what is shutting this down? 73/gus kr4k

Renamed the Fldigi.files and tried again, and then I was able to get FlDigi to start. I had looked at the wrong place. 73 Frode LA6VQ

I am new to this group, and have checked the archives for information about the no-start, but found nothing that helps. I run Win 10 Pro with the latest updates yesterday on a Dell Latitude E7440, i7

Make sure that Windows is blocking socket access to either fldigi or flrig.  Also make sure there isn't a flrig zombie running in the background.  Easiest way to insure that only a single instance

Hi, I am using fldigi 4.018 and flrig 1.3.41.30 on Windows 10. I have checked Enable flrig xcvr control with fldigi as client. This has been working fine for several months. Now I cant get it to

Robert, Fldigi logbook export allows you to choose manually which entries to export or by date so no need to empty the log. You also choose which fields to export. It’s very flexible and easy to

Dave, I didn't see this one, but that was quite a reply. It's Open Source under the GPL, I get it. It's a good, streamlined program. Thank you for confirming my guess on the

These problems I had, once corrected, also cured the frequency issue in the Logbook. I was able to shut HRD down and retain the Logbook, but it wasn't working correctly, for example, it

Good info Norm.  I'm trying to determine if this is a coding error on my part and the more info the better. Dave

I sent the files Dave. One more thing I've noticed. If I start flrig with the 7100 icon and select IC-7300 for the RIG, I can get the 7300 working just fine. If I select IC-7200 for the RIG and

They both look correct.  If you look in the folders c:\Users\Den\flrig.files-7100\ and c:\Users\Den\flrig.files-7300\ You should find to files that are used to save the configuration

I've tried to send this a few times and thought it had already gone. Sorry..... Here it is for the 7300. Hope it goes this time....

Please ... I asked you to show this dialog for both the 7300 and the 7100. 73, David