Date   
Re: RST In Out raport disappears

Robert, SP8SN
 

this is clear Call field



and when I put some call



Re: RST In Out raport disappears

Robert, SP8SN
 

I have 599 set in UI / Contests and in UI / Logbook default 599
(in polish lang)





Re: RST In Out raport disappears

Cliff
 

Robert,

In which config window did you set for 599 default? There are two places to set. One in Contest and one in Log. Be sure you have both set if that is what you want.

73,
Cliff, AE5ZA

On Nov 2, 2018, at 00:56, Robert, SP8SN <r.krokowski@...> wrote:

Hallo all.
I have some problem with default RST raport in log fields.
In config window I have the default 599 in out report checked.
When I put a station call in the callsign field, the default report in the in and out boxes disappears.
You have to insert it manually because it will not be saved in the log.
Is it a bug, if I'm doing something wrong ?
Best 73, Robert SP8SN

Re: flrig error on shut down

Dave
 

What version of flrig?
What version of Windows?
What transceiver in use?
Specifics on the serial connection?

73, David

On 11/1/18 11:39 PM, Rick Hanzlik via Groups.Io wrote:
Whenever I shut down the flrig applications I get a visual c++ run time error. Any body have any thought on this?

Grand Solar Minimum : Good for TTY modes, if the cold from it does not leave one starved or bankrupted ...

Max Power
 


The Grand Solar Minimum : 

GRAND SOLAR MINIMUMS ARE probably "Good for TTY modes" as the Solar Storms pretty much go to NIL ... 

Solar Storms tend to play hovac with the Phase and Amplitude (and Doppler) of TTY signals of the non-CODFM or arrayed PSK / FSK ...

Bad Antisocial Governmental Agency Stuff
-- A Fortnight without a Sunspot should trigger a "AGRICULTURE NEGATIVE IMPACT ADVISORY"
-- A Week without a sunspot should actually be "SOLAR NO SUNSPOT ALERT CONDITION" 
-- 3 Days SANS SUNSPOTS should trigger an "ANOMALOUS SW PROPAGATION ALERT"
 
The Solar Terrestrial Environment is best self run with 1/sunspot {day} ... as a bare minimum. 
Yea, 5 sunspots at a time is too much ... but not catastrophically harmful. "8 or 9" OY! 

Lack of Sunspots (generally in 200y cycles, but there is an FFT that accounts for the 3 variations in Solar Minimums) is tied to temperature downturns globally, but with volcanoes playing with the global coldness relationship as a factor.

The Younger Dryas and Mini-Ice-Age had many volcano events that were lowering global temperatures. 

SINCE 1800: 
NON-CO2 compounds aka hydrocarbon and fluorocarbon and carbon (buckyball) aerosols in the lower and middle atmosphere (but due to solar wind get into the ionosphere) -- have gone up in concentration geometrically.

These mostly human made compounds have also affected the levels and layers of the ionosphere ... but the effect has been gradual. The new chemical stew in the ionosphere has not messed with the non-linear phase and group delays that messes up various RTTY modes readability.   


SUMMARY 
... if the cold from LACK OF SUNSPOTS does not leave one starved or bankrupted ... your RTTY traffic will get thru ....


RST In Out raport disappears

Robert, SP8SN
 

Hallo all.
I have some problem with default RST raport in log fields.
In config window I have the default 599 in out report checked.
When I put a station call in the callsign field, the default report in the in and out boxes disappears.
You have to insert it manually because it will not be saved in the log.
Is it a bug, if I'm doing something wrong ?
Best 73, Robert SP8SN

Re: Multiple fldigi instances with flrig

John Wagner
 

Hi Michael, Have been trying to run both DMT and Fldigi together all using just one USB cable but have not been able to get the Fldigi to key xmint. Audio seems to be there as (running both at same time minimized) both will print any transmition sent , DMT will print any 110A and Fldigi will print any Olivia sent, but when I then open DMT I can then xmit on 110A (keeping Fldigi minimized) and same if I open Olivia in Fldigi can read what was sent except can't xmint. Both are config audio as USB audio CODEC. I use VSPE to share DMT Com6 and Station Manager Com16 so they can share files and IC-V address set at 88h. I have been told that address must be 94h for Fldigi to send control code so Fldigi will xmit which could be done by changing the IC-7300.xml power level line from 88 to 94 (this file used by Fldigi when opened). Any Ideas? Have you changed anything in the xml file?
Thank you for any ideas to try. 73's, John, WA8CKT
p.s Everything worked together when using my SignaLink USB, of course a few configs were different to use that unit but wanted to try the USB cable along with the built in audio of the 7300 with it's cleaner audio, so they say. Must be some way to make it work.



On Sunday, October 28, 2018, 12:17:16 PM EDT, WA7SKG via Groups.Io <wa7skg@...> wrote:


I use VSPE on a daily basis to allow multiple applications to access
radio CAT/COM Ports. I have had as many as four applications at once all
communicating with my IC-7300 over a single USB cable. I also have
multiple applications connecting to multiple radios. For instance, right
now I have one instance of fldigi and MMSSTV connected to a 2-meter
radio scanning a couple of frequencies receiving digital traffic from a
local repeater and pictures from the ISS. Simultaneously, I have two
instances of fldigi and other software connected to the IC-7300
receiving WEFAX weather and digital communications on a couple of HF
frequencies.

73,
Michael WA7SKG



flrig error on shut down

Rick Hanzlik
 

Whenever I shut down the flrig applications I get a visual c++ run time error. Any body have any thought on this?

Re: RxID Issue

K1HRV <d.doe@...>
 

…or RIGHT CLICK the RSID button for quick access

 

Dave – K1HRV

 

From: KD3WB
Sent: Thursday, November 1, 2018 2:49 PM
To: winfldigi@groups.io
Subject: Re: [winfldigi] RxID Issue

 

I see Olivia regularly at night between 7072 and 7074.  As mentioned by others, make sure you have "Searches passband" checked on the RsID page.

Ben

 

Re: Satellite Weather Pictures

Gene Rozea
 

Actually, it’s an fldigi forum and fldigi does include wefax decode. So, it would appear to be on topic.

Gene

 

 


From: winfldigi@groups.io <winfldigi@groups.io> on behalf of Renee Culver <rmctwoo@...>
Sent: Thursday, November 1, 2018 12:19:49 PM
To: winfldigi@groups.io
Subject: Re: [winfldigi] Satellite Weather Pictures
 

Im so tired of weather satellite pics on a ham list I could cry!!!

Renee KC3NG

 

Sent from Mail for Windows 10

 

From: Cliff
Sent: Thursday, November 1, 2018 9:08 AM
To: winfldigi@groups.io
Subject: Re: [winfldigi] Satellite Weather Pictures

 

Opps, meant to say adjust the Slant control. Align moves the image left and right.

 

73,

Cliff, AE5ZA

 

On Nov 1, 2018, at 07:04, Cliff <ae5zaham@...> wrote:

 

Adjust the Align control below the image.

 

73,

Cliff, AE5ZA

 

On Oct 31, 2018, at 23:29, KB3RAN 1692/381 via Groups.Io <davehardy0101@...> wrote:

 

Tried out the WEFAX and got some bulletins and a couple of maps.  They were skewed down the page at a slant.  I saw some instructions on syncing my clock but it didn't make a lot of sense.  Was on 6340 using fldigi latest version.  It was interesting to get a current map.  Could be helpful when I am traveling off the grid.

David Hardy   

KB3RAN

CARA President

 

 

 

 

Re: RxID Issue

KD3WB
 

I see Olivia regularly at night between 7072 and 7074.  As mentioned by others, make sure you have "Searches passband" checked on the RsID page.

Ben

Re: Satellite Weather Pictures

DupyRail
 

Doesn't bother me.  Sometimes one can pick up useful information.  I just delete what doesn't interest me .. keeps the delete button from being oxidized.

Just say'in


Andy  K9ATX


On 11/1/2018 11:19 AM, Renee Culver wrote:

Im so tired of weather satellite pics on a ham list I could cry!!!

Renee KC3NG

 

Sent from Mail for Windows 10

 

From: Cliff
Sent: Thursday, November 1, 2018 9:08 AM
To: winfldigi@groups.io
Subject: Re: [winfldigi] Satellite Weather Pictures

 

Opps, meant to say adjust the Slant control. Align moves the image left and right.

 

73,

Cliff, AE5ZA

 

On Nov 1, 2018, at 07:04, Cliff <ae5zaham@...> wrote:

 

Adjust the Align control below the image.

 

73,

Cliff, AE5ZA

 

On Oct 31, 2018, at 23:29, KB3RAN 1692/381 via Groups.Io <davehardy0101@...> wrote:

 

Tried out the WEFAX and got some bulletins and a couple of maps.  They were skewed down the page at a slant.  I saw some instructions on syncing my clock but it didn't make a lot of sense.  Was on 6340 using fldigi latest version.  It was interesting to get a current map.  Could be helpful when I am traveling off the grid.

David Hardy   

KB3RAN

CARA President

 

 

 

 


-- 
"Where the Old Soo crossed the New Soo"
Duplainville, Wisconsin

Web Page:  www.dupyrail.com

Re: RxID Issue

Rob J.
 

re: pskreporter - Yes it varies. I just checked  at 1311L Eastern / NY time zone / 1712UTC there were 20 stations listening in North America on 20M and I find similar in the evening on 40M. East coast and mid-west seem to have most stations which works fine for me - far from useless. I guess your mileage varies based on location and time. Also, I set filter to "PSK" not one of specific modes to show as many as possible. Usually at least 3 or 4 stations will copy my CQ and report so at least I know my signal getting out.

Also, I went through the steps to configure and activate spotting in both fldigi and HRD programs. I'm not on the air that frequently but I figure I might as well do my part to help out. The more folks that do this the better.

73, Rob - KD2GRS

Re: Satellite Weather Pictures

Mike Olbrisch
 

That’s the neat function of a delete key, and even setting rules.  When a subject doesn’t interest me, I delete it.  When it goes on for longer than I care to know, I set a rule to auto-delete it.  And when I find a person too obnoxious to want to deal with, I write a rule to just delete anything they send.

 

WX satellites do not really interest me.  But then, some of the stuff I do might be of little interest to the group too.  So I figure live and let live, and write a rule to delete stuff rather than complain.  Saves bandwidth and keeps the harmony.

 

Vy73 – Mike – KD5KC

El Paso, Texas – DM61rt

 

 

 

From: winfldigi@groups.io <winfldigi@groups.io> On Behalf Of Renee Culver
Sent: Thursday, November 1, 2018 10:20 AM
To: winfldigi@groups.io
Subject: Re: [winfldigi] Satellite Weather Pictures

 

Im so tired of weather satellite pics on a ham list I could cry!!!

Renee KC3NG

 

Sent from Mail for Windows 10

 

From: Cliff
Sent: Thursday, November 1, 2018 9:08 AM
To: winfldigi@groups.io
Subject: Re: [winfldigi] Satellite Weather Pictures

 

Opps, meant to say adjust the Slant control. Align moves the image left and right.

 

73,

Cliff, AE5ZA

 

On Nov 1, 2018, at 07:04, Cliff <ae5zaham@...> wrote:

 

Adjust the Align control below the image.

 

73,

Cliff, AE5ZA

 

On Oct 31, 2018, at 23:29, KB3RAN 1692/381 via Groups.Io <davehardy0101@...> wrote:

 

Tried out the WEFAX and got some bulletins and a couple of maps.  They were skewed down the page at a slant.  I saw some instructions on syncing my clock but it didn't make a lot of sense.  Was on 6340 using fldigi latest version.  It was interesting to get a current map.  Could be helpful when I am traveling off the grid.

David Hardy   

KB3RAN

CARA President

 

 

 

 

Re: Satellite Weather Pictures

Cliff
 

Michael,

I missed that it was a satellite image you wanted. Sorry for the confusion. 

73,
Cliff, AE5ZA

On Nov 1, 2018, at 10:57, WA7SKG via Groups.Io <wa7skg@...> wrote:

Thanks Cliff. Yes, I'm aware that fldigi is multi-platform. But apparently you were not aware that fldigi does not decode APT NOAA satellite transmissions.

73,
Michael WA7SKG


Cliff wrote on 10/31/18 21:00:
I’m sure you are aware that fldigi runs on Linux, MacOS as well as Windows.
73,
Cliff, AE5ZA
On Oct 31, 2018, at 21:00, WA7SKG via Groups.Io <wa7skg@...> wrote:

I guess I should have mentioned I was really hoping to find something that ran on Linux.

Michael WA7SKG

Eric Furness wrote on 10/31/18 03:46:
The best vhf wefax program is Wxtoimg.  It is no longer supported but there is a mirror site
https://www.szenebox.org/54-tk-voip-gsm-funk/9016-download-wxtoimg-version-2-10-11-software-decode-apt-wefax-signals-weather-satellites-mirror/ Eric WA3UYI




Re: Satellite Weather Pictures

Renee Culver
 

Im so tired of weather satellite pics on a ham list I could cry!!!

Renee KC3NG

 

Sent from Mail for Windows 10

 

From: Cliff
Sent: Thursday, November 1, 2018 9:08 AM
To: winfldigi@groups.io
Subject: Re: [winfldigi] Satellite Weather Pictures

 

Opps, meant to say adjust the Slant control. Align moves the image left and right.

 

73,

Cliff, AE5ZA

 

On Nov 1, 2018, at 07:04, Cliff <ae5zaham@...> wrote:

 

Adjust the Align control below the image.

 

73,

Cliff, AE5ZA

 

On Oct 31, 2018, at 23:29, KB3RAN 1692/381 via Groups.Io <davehardy0101@...> wrote:

 

Tried out the WEFAX and got some bulletins and a couple of maps.  They were skewed down the page at a slant.  I saw some instructions on syncing my clock but it didn't make a lot of sense.  Was on 6340 using fldigi latest version.  It was interesting to get a current map.  Could be helpful when I am traveling off the grid.

David Hardy   

KB3RAN

CARA President

 

 

 

 

Re: Satellite Weather Pictures

WA7SKG <wa7skg@...>
 

Thanks, Eric. Somehow I missed that wherever I downloaded it for Windows. Found the .deb package at https://wxtoimgrestored.xyz/downloads/

tnx es 73,
Michael WA7SKG


Eric Furness wrote on 11/1/18 03:26:

On 10/31/2018 22:00, WA7SKG via Groups.Io wrote:
I guess I should have mentioned I was really hoping to find something that ran on Linux.

Michael WA7SKG

Yes there is a Linux version also.  I use it all the time.... Not sure where the download is for it but I guess search for it.
Eric WA3UYI

Re: RxID Issue

WA7SKG <wa7skg@...>
 

I tried this a short time ago. I set the filter on pskreporter to psk31 on 40 meters and found exactly three reporting stations in the U.S. and five or six on 20 meters. So, unfortunately, pskreporter is of little value any more for psk31 users. If you are using FT8, that is another story.

Michael WA7SKG


Rob J. wrote on 11/1/18 06:03:

Peter,
To add to the info already posted by others.
If you are calling CQ on PSK31 you should go to pskreporter.info website. Look and see which stations are on and which mode and band. You CQ should eventually show up as received by one of them if you are using the macros and actually have CQ and your call in what you transmit. Not as much PSK traffic as in the past but usually I can always rustle up a few contacts. Keep at it.

Re: Satellite Weather Pictures

WA7SKG <wa7skg@...>
 

Thanks Cliff. Yes, I'm aware that fldigi is multi-platform. But apparently you were not aware that fldigi does not decode APT NOAA satellite transmissions.

73,
Michael WA7SKG


Cliff wrote on 10/31/18 21:00:

I’m sure you are aware that fldigi runs on Linux, MacOS as well as Windows.
73,
Cliff, AE5ZA

On Oct 31, 2018, at 21:00, WA7SKG via Groups.Io <wa7skg=yahoo.com@groups.io> wrote:

I guess I should have mentioned I was really hoping to find something that ran on Linux.

Michael WA7SKG

Eric Furness wrote on 10/31/18 03:46:
The best vhf wefax program is Wxtoimg. It is no longer supported but there is a mirror site
https://www.szenebox.org/54-tk-voip-gsm-funk/9016-download-wxtoimg-version-2-10-11-software-decode-apt-wefax-signals-weather-satellites-mirror/ Eric WA3UYI

Re: Satellite Weather Pictures

Cliff
 

Opps, meant to say adjust the Slant control. Align moves the image left and right.

73,
Cliff, AE5ZA

On Nov 1, 2018, at 07:04, Cliff <ae5zaham@...> wrote:

Adjust the Align control below the image.

73,
Cliff, AE5ZA

On Oct 31, 2018, at 23:29, KB3RAN 1692/381 via Groups.Io <davehardy0101@...> wrote:

Tried out the WEFAX and got some bulletins and a couple of maps.  They were skewed down the page at a slant.  I saw some instructions on syncing my clock but it didn't make a lot of sense.  Was on 6340 using fldigi latest version.  It was interesting to get a current map.  Could be helpful when I am traveling off the grid.

David Hardy   
KB3RAN
CARA President