Re: XML File

Cliff
 

Marty,

No need to open it. Just download the file and move it into the Rigs directory. I don’t know what you do to “open it in the browser”, but it isn’t needed. Download it the same way you do the fldigi file.

73,
Cliff, AE5ZA

On Apr 9, 2018, at 16:04, Gene Rozea <gene_rozea@...> wrote:

Rigcat, yes. Still works that. Flrig, no.

 

 


From: winfldigi@groups.io <winfldigi@groups.io> on behalf of Marty Hartwell <mhartwe@...>
Sent: Monday, April 9, 2018 4:22:06 PM
To: winfldigi@groups.io
Subject: Re: [winfldigi] XML File
 
Hi Dave

I haven't used RigCat in a long time but when I did get the rig
file I opened it in the browser, and then saved the contents in
the rig folder in Fldigi. I don't know if it works that way now
or not.

Marty kd8bj


On 04/09/2018 12:16 PM, David Stewart wrote:
> Bruce
>   Thank you so much!
> That is easier to understand than:-- Put the XML file in the fldigi 
> folder!!!
> Dave
> AA0AE
> 
> 
> 
> On Mon, Apr 9, 2018 at 12:05 PM, Bruce N7XGR <n7xgr1@... 
> <mailto:n7xgr1@...>> wrote:
> 
>     Dave,  This is how to put a XML file into FLdigi.  If you have
>     downloaded the XML
>     file from Sourceforge then do the following.  From where that XML
>     file is downloaded to
>     you copy and paste from there and paste it here,
>     C:\Users\YourName\fldigi.files\rigs
>     In FLdigi select Configure>Rig Control>RigCAT Tab.  Click on Open
>     next to the
>     Rig description file, navigate to the rigs folder where you pasted
>     the XML file
>     then select it there.
> 
>     Bruce  N7XGR
> 
>     On Mon, Apr 9, 2018 at 12:36 PM, David Stewart <aa0ae1@...
>     <mailto:aa0ae1@...>> wrote:
> 
>         I Think my problem is i am getting programs confused. my main
>         concern is the part in previous post. How would i put a xml file
>         in Fldigi? is it as simple as copy paste to notepad, then place
>         in the Fldigi main file and then let Flrig find the file?
> 
>         Dave
>         AA0AE
> 
>         On Mon, Apr 9, 2018 at 11:04 AM, Cliff <ae5zaham@...
>         <mailto:ae5zaham@...>> wrote:
> 
>             Flrig does NOT use a XML file. That is ONLY for RigCat and
>             in that case you put the file downloaded from the fldigi
>             website in the Rigs Directory in the fldigi parent directory.
> 
>             Flrig has all the rig info built in so just select the rig
>             in the flrig config window and then set the parameters as
>             needed. Read the flrig manual!!!
> 
>             73,
>             Cliff, AE5ZA
> 
>>             On Apr 9, 2018, at 09:19, David Stewart <aa0ae1@...
>>             <mailto:aa0ae1@...>> wrote:
>>
>>             Group
>>
>>             My Question is: How would i put a xml file in Fldigi? is
>>             it as simple as copy paste to notepad, then place in the
>>             Fldigi main file and then let Flrig find the file?
>>
>>             I have tried that and Flrig doesn't work. is some one
>>             would give me a do this list i would appreciate it. I am
>>             lost when customizing software to a use with a rig.
>>             Computer is dell w/ windows 7 pro.
>>             rig is 857d connected with a rig blaster pro.
>>
>>             I have some luck using above combination. The computer
>>             does receive and transmit signals. Decoding could use
>>             improvement in most modes the transmit seems to work fine,
>>             at least the other end of the qso responds accordingly.
>>
>>             also if i use N7YG's Yaesu FT-857 CAT Controller will it
>>             interfere with Fldigi or Flrig.
>>
>>             Dave
>>             AAoae
> 
> 
> 
> 
> 




Join winfldigi@groups.io to automatically receive all group messages.