Re: XML File
Rigcat, yes. Still works that. Flrig, no.
From: firstname.lastname@example.org <email@example.com> on behalf of Marty Hartwell <mhartwe@...>
Sent: Monday, April 9, 2018 4:22:06 PM
Subject: Re: [winfldigi] XML File
I haven't used RigCat in a long time but when I did get the rig
file I opened it in the browser, and then saved the contents in
the rig folder in Fldigi. I don't know if it works that way now
On 04/09/2018 12:16 PM, David Stewart wrote:
> Thank you so much!
> That is easier to understand than:-- Put the XML file in the fldigi
> On Mon, Apr 9, 2018 at 12:05 PM, Bruce N7XGR <n7xgr1@...
> <mailto:n7xgr1@...>> wrote:
> Dave, This is how to put a XML file into FLdigi. If you have
> downloaded the XML
> file from Sourceforge then do the following. From where that XML
> file is downloaded to
> you copy and paste from there and paste it here,
> In FLdigi select Configure>Rig Control>RigCAT Tab. Click on Open
> next to the
> Rig description file, navigate to the rigs folder where you pasted
> the XML file
> then select it there.
> Bruce N7XGR
> On Mon, Apr 9, 2018 at 12:36 PM, David Stewart <aa0ae1@...
> <mailto:aa0ae1@...>> wrote:
> I Think my problem is i am getting programs confused. my main
> concern is the part in previous post. How would i put a xml file
> in Fldigi? is it as simple as copy paste to notepad, then place
> in the Fldigi main file and then let Flrig find the file?
> On Mon, Apr 9, 2018 at 11:04 AM, Cliff <ae5zaham@...
> <mailto:ae5zaham@...>> wrote:
> Flrig does NOT use a XML file. That is ONLY for RigCat and
> in that case you put the file downloaded from the fldigi
> website in the Rigs Directory in the fldigi parent directory.
> Flrig has all the rig info built in so just select the rig
> in the flrig config window and then set the parameters as
> needed. Read the flrig manual!!!
> Cliff, AE5ZA
>> On Apr 9, 2018, at 09:19, David Stewart <aa0ae1@...
>> <mailto:aa0ae1@...>> wrote:
>> My Question is: How would i put a xml file in Fldigi? is
>> it as simple as copy paste to notepad, then place in the
>> Fldigi main file and then let Flrig find the file?
>> I have tried that and Flrig doesn't work. is some one
>> would give me a do this list i would appreciate it. I am
>> lost when customizing software to a use with a rig.
>> Computer is dell w/ windows 7 pro.
>> rig is 857d connected with a rig blaster pro.
>> I have some luck using above combination. The computer
>> does receive and transmit signals. Decoding could use
>> improvement in most modes the transmit seems to work fine,
>> at least the other end of the qso responds accordingly.
>> also if i use N7YG's Yaesu FT-857 CAT Controller will it
>> interfere with Fldigi or Flrig.