thank you - and you have great prices, too, in addition to other things difficult if not impossible to find elsewherre (e.g. autodenters!)

I am not sure where you are based, but for those in Europe, I found a German vendor yesterday that had it at about 550Euros, to which post Brexit I'd have to add custom duties (I am based in the UK). It is too much for my current needs and equipment, but definitely one for my wishlist!

Paola

I contacted Lone Star today.  They sell Venne.  She is going to get back to me with a cost.

--
Denise Drake

Does anyone have an idea of a price for this twister & whether it is available in the US?

Well, this is interesting.  I stand corrected.  I'll be interested in looking over the Venne twister.

Sandy

Sent from Samsung Galaxy smartphone.

-------- Original message --------

From: Penny Peters <pennyjanepeters@...>

Date: 2/2/21 12:52 PM (GMT-07:00)

To: weavetech@groups.io

Subject: Re: [weavetech] Multi yarns used as one

I just looked at the Venn twister.... Thank you, Marion.

Thanks for all the input from everyone.  Now I have a better idea of what to do with all the very very thin silk I have. 

Penny

On Mon, Feb 1, 2021 at 4:46 PM Marion Stubenitsky <stubenitsky@...> wrote:

Well Penny, I happen to own a yarn twister from Venne-Colcoton Unikat. A maximum of 9 cones fit in the device. For Stubenitsky Code I used three cones of 20/2 mercerized cotton for warps and wefts. The ‘singles’ loosely  ply together. 

Marian

Verstuurd vanaf mijn iPhone

Op 1 feb. 2021 om 21:51 heeft Vera Totos <vtotos@...> het volgende geschreven:



You can use a doubling stand, something like this: 

https://woolery.com/leclerc-doubling-stand.html

The idea is that the thread on the bottom goes through the center of the top cone, and as they unwind together, the top thread twists around the thread in the center, keeping the two from separating while winding or weaving. 

Vera

On Mon, Feb 1, 2021 at 12:45 PM Penny Peters <pennyjanepeters@...> wrote:

Reading The Stubenitsky Code, it looks as if on occasions, 3 strands of fine yarn are used as one, in warp and weft.Made me wonder if anyone has a good method for winding two or three yarns together on a pirn or bobbin.  It is something I have never done successfully.

Thanks

Penny Peters

I have been looking at them, but they are so expensive. Would a cheaper model do the trick?

Denise Drake
ddrake@...
Denise Drake Interior Design
4976 Avery Ln S
Fargo ND 58104
T 701 235 8803 M 701 866 2130

--
Denise Drake

I haven't seen any mention of using a spinning wheel to ply the yarns together, but I might have missed it. I use an electric spinning wheel to ply multi strands together for a big project but for the sample where I want to try this and that, I use the cones on top of each other as described. The electric spinning wheel is fast and I can control the tension thru my hand grip. Just a word of warning though. Once, I plied two silk yarns together, gobs of it, and then I discovered that they had different shrinkage rates when I dyed them! I had gobs of unusable yarn!
Suzy

This works for weft, but not for warp?

--
Denise Drake

Yes, all the suggestions are good and I add a damp microfiber cloth wrapped around the exit of the stand with the doubled yarns, and another damp microfiber in my hand as I guide the threads onto the pirn.  Helps the threads stick together AND protects my hand from cuts and burns.  And yes, mixing shades makes for lovely depth of color. Treadle with Joy, Kati

Oh darn, I was hoping to use it for my stock of 140/2 silk.  I’m wanting to use them tripled in a warp. 

--
Denise Drake

Marian,

I’ve seen this yarn twister.  Anyplace you can buy in the US?

Denise Drake

ddrake@...

Denise Drake Interior Design

4976 Avery Ln S

Fargo ND 58104

T 701 235 8803   M 701 866 2130  

On Feb 1, 2021, at 5:46 PM, Marion Stubenitsky <stubenitsky@...> wrote:

 Well Penny, I happen to own a yarn twister from Venne-Colcoton Unikat. A maximum of 9 cones fit in the device. For Stubenitsky Code I used three cones of 20/2 mercerized cotton for warps and wefts. The ‘singles’ loosely  ply together. 

Marian

Verstuurd vanaf mijn iPhone

Op 1 feb. 2021 om 21:51 heeft Vera Totos <vtotos@...> het volgende geschreven:



You can use a doubling stand, something like this: 

https://woolery.com/leclerc-doubling-stand.html

The idea is that the thread on the bottom goes through the center of the top cone, and as they unwind together, the top thread twists around the thread in the center, keeping the two from separating while winding or weaving. 

Vera

On Mon, Feb 1, 2021 at 12:45 PM Penny Peters <pennyjanepeters@...> wrote:

Reading The Stubenitsky Code, it looks as if on occasions, 3 strands of fine yarn are used as one, in warp and weft.Made me wonder if anyone has a good method for winding two or three yarns together on a pirn or bobbin.  It is something I have never done successfully.

Thanks

Penny Peters

--
Denise Drake

Marian,

--
Denise Drake