Replacing the hooks with texsolve can damage the shafts if not done carefully. Sandra

I have never had a problem with hooks coming off my Baby Mac, and I treadle fast and do not release the treadles gently. The hooks fit snugly on the lamms and I remove them with pliars. Sandra

We also just went through the AVL-K software upgrade. I haven't used the loom since upgrading as there is no warp on it presently. Maybe you would like to join the AVL-K group in .io Igor, and share

I, too, saw this on my phone but I didn't get a chance to note the source. Thanks for posting the link today, Nadine! There are so many exhibits showcasing weaving going on right now, all around the

Hooks can become misshapen. If the long straight part of the hook is bent or bowed enough (or if the treadle slot has warped) the hooks can get stuck in the treadle slot. Then, when the treadle is

Hi Cynthia Interesting. Will give it a try. Louise in NorCal ------------------

I hope they help!! Get Outlook for iOS

Hi Nann Thank you for the valuable tips. Louise in NorCal ------------------

I have used a Macomber 8-shaft 48" B4 for over 50 years--20 of those as a production weaver. Alden Amos timed our weaving speed at a shot every second to 1-1/4 seconds, so speed isn't the issue. The

Went through an upgrade of the software on and AVL K series loom this morning. Had a few problems most of which were operator error and computer security interference at my end. Bob and Tim at AVL

I have not found this to be a problem on any macombers I have used. I have only woven on full size mac not baby macs so that might make the difference. I am a production weaver and like the macs

Found this article in this week's Artsy email interesting re: fiber

Part of the problem with the treadle hooks on Macomber looms is treadling technique. This loom likes the treadles to be released slowly rather than just rapidly lifting the foot

Youhttps://www.ravelry.com/groups/macomber-looms There is a very active and helpful Macomber loom group on Ravelry. You'll find many resources available to all Macomber questions, including your

Hi Louise, I solved that question using Texsolv linked-loop cords with Texsolv arrow pegs. They are available from the Yarn Barn of Kansas and elsewhere. You have to calibrate the length of the cord

Thanks to all who gave information about Leslie Voiers. I found her! And have permission to reprint a handout and also add a copy of it to the CW library. With any luck, she’ll come out of

Hi Mary Margaret I think we have different models. There are no holes for the hooks. They just clip onto the horizontal metal bar. Louise in NorCal ------------------------

Yes. Totally worth ordering the newer long or super hooks. They go in the treadle slot (treadle propped on a coffee can) , and while physically depressing the lamm, hook the hook OVER THE TOP of the

I have been teaching weaving at RI School of Design for 40 years. We have 50 Macombers of different vintages. Feel free to call me and I can explain to you about the different hooks. Email me

The Super hooks are well worth the cost. One must monitor them as they tend to spread at the hook end occasionally—so you just pinch them together a bit. You may want to make certain you have a