|
New NTP Clock
#esp32
#pcb
#build
My pcboards from JLCPCB came in today, ordered 02/15, 15 days, pretty good! It took about 10 minutes to find the parts and build the board. It looks really good!!! Thanks Bruce!!! Mitch W4OA ps I have
My pcboards from JLCPCB came in today, ordered 02/15, 15 days, pretty good! It took about 10 minutes to find the parts and build the board. It looks really good!!! Thanks Bruce!!! Mitch W4OA ps I have
|
By w4oa@arrl.net
·
|
|
New GPS clock 3 messages
#build
#stm32
Finally got wiring, libraries and st-link straight. Looks really good. Now to 3d print a nice case for it! Mitch W4OA
Finally got wiring, libraries and st-link straight. Looks really good. Now to 3d print a nice case for it! Mitch W4OA
|
By w4oa@arrl.net
·
|
|
Group Files Permissions
On Thu, Feb 18, 2021 at 7:30 AM Karl Jan Skontorp <karl.jan.skontorp@...> wrote: > > I hope attaching files is ok. I have tried to make a folder end upload in the files section, but it seems that Bruc
On Thu, Feb 18, 2021 at 7:30 AM Karl Jan Skontorp <karl.jan.skontorp@...> wrote: > > I hope attaching files is ok. I have tried to make a folder end upload in the files section, but it seems that Bruc
|
By Ken KM4NFQ
·
|
|
NTP clock update 12 messages
There are a few small updates to the NTP clock. The code now supports ESP32 and ESP8266 microcontrollers. New PCBs using the ESP8266 were designed, which support 2.2, 2.8, and 3.2" displays. And a bui
There are a few small updates to the NTP clock. The code now supports ESP32 and ESP8266 microcontrollers. New PCBs using the ESP8266 were designed, which support 2.2, 2.8, and 3.2" displays. And a bui
|
By Bruce Hall
·
|
|
Case for the Morse Tutor 7 messages
Hello All: I decided that I needed to put some plastic over the unit to keep the dust out and also to make the unit a little more ruggedized for my use around the shop, the car and the office. I looke
Hello All: I decided that I needed to put some plastic over the unit to keep the dust out and also to make the unit a little more ruggedized for my use around the shop, the car and the office. I looke
|
By Allan Hale
·
|
|
NTP Clock on ESP8266 4 messages
Greetings all... The ESP8266 is another WiFi capable board that's available and affordable. They're a bit slower and have less memory and fewer pins than the ESP32 but are fine for many WiFi applicati
Greetings all... The ESP8266 is another WiFi capable board that's available and affordable. They're a bit slower and have less memory and fewer pins than the ESP32 but are fine for many WiFi applicati
|
By Mark M
·
|
|
PCB for NTP clock
All, I am reposting the message below from another forum. Don is doing a group purchase for the clock PCB. If anyone has interest, please contact him directly. Bruce w8bh.net "1/15/21: Just a reminder
All, I am reposting the message below from another forum. Don is doing a group purchase for the clock PCB. If anyone has interest, please contact him directly. Bruce w8bh.net "1/15/21: Just a reminder
|
By Bruce Hall
·
|
|
Chinese New Year 2021
#pcb
Chinese New Year, also known as the Spring Festival or the Lunar New Year, marks the first day of the New Year in the Chinese calendar. Chinese New Year 2021 falls on Friday, February 12th, 2021, and
Chinese New Year, also known as the Spring Festival or the Lunar New Year, marks the first day of the New Year in the Chinese calendar. Chinese New Year 2021 falls on Friday, February 12th, 2021, and
|
By Ken KM4NFQ
·
|
|
Wanted: programmed board 3 messages
Folks, I'd like to purchase a board, already programmed for the code Tutor. I have all the bits, just no board. Failing that, I'd consider purchasing a completed assembly if necessary. The only source
Folks, I'd like to purchase a board, already programmed for the code Tutor. I have all the bits, just no board. Failing that, I'd consider purchasing a completed assembly if necessary. The only source
|
By J.C. Hassall
·
|
|
PCB for the NTP clock 3 messages
John WA2FZW designed a PCB for the NTP clock. I've uploaded his description and gerbers to GitHub on the project page at: https://github.com/bhall66/NTP-clock Bruce w8bh.net
John WA2FZW designed a PCB for the NTP clock. I've uploaded his description and gerbers to GitHub on the project page at: https://github.com/bhall66/NTP-clock Bruce w8bh.net
|
By Bruce Hall
·
|
|
NTP Clock
If you have a spare display and an ESP32 from your Morse Tutor, here is another easy clock project. Only 2 components! Description: http://w8bh.net/NTP_DualClock.pdf Source Code: https://github.com/bh
If you have a spare display and an ESP32 from your Morse Tutor, here is another easy clock project. Only 2 components! Description: http://w8bh.net/NTP_DualClock.pdf Source Code: https://github.com/bh
|
By Bruce Hall
·
|
|
Another Off Topic: W*BH's GPS Clock 14 messages
Hi Bruce Still playing with my version of the GPS Clock. Looking through the code there is a line #define TITLE "GPS TIME" // shown at top of display But does not appear. Also there was an update to t
Hi Bruce Still playing with my version of the GPS Clock. Looking through the code there is a line #define TITLE "GPS TIME" // shown at top of display But does not appear. Also there was an update to t
|
By Dave, G8PGO
·
|
|
Off Topic: W8BH's GPS CLOCK
Hi guys. Just finished Bruce's new project, the GPS Clock. With only 3 parts (Blue Pill, Display and GPS Module), you can have a nice accurate clock for the shack. I have been referring to a small pap
Hi guys. Just finished Bruce's new project, the GPS Clock. With only 3 parts (Blue Pill, Display and GPS Module), you can have a nice accurate clock for the shack. I have been referring to a small pap
|
By Ken WB2ART
·
|
|
Off-topic: WWVB clock 9 messages
It's way off topic, but if you have spare Blue Pills or displays from your Morse Tutor you may be interested. I did a quick and easy clock project using those components. Documentation: http://w8bh.ne
It's way off topic, but if you have spare Blue Pills or displays from your Morse Tutor you may be interested. I did a quick and easy clock project using those components. Documentation: http://w8bh.ne
|
By Bruce Hall
·
|
|
Pocket Tutor extra pcb's and built Morse Tutors
Hi guys. I have 2 pocket tutor bare pcb's, 2 morse tutors with 2.2 inch displays and 2 morse tutors with 3.2 inch displays. All 4 work great. Please email me at wb2art@... if interested. I have no oth
Hi guys. I have 2 pocket tutor bare pcb's, 2 morse tutors with 2.2 inch displays and 2 morse tutors with 3.2 inch displays. All 4 work great. Please email me at wb2art@... if interested. I have no oth
|
By Ken WB2ART
·
|
|
Extra MCT PCBs - Anyone Need One?
Greetings all... I have five PCBs for Bruce's Morse Tutor that I don't need so I'm offering them to the group. These are the Rev. 2A boards from the Gerber files that Bruce posted. I'm not looking to
Greetings all... I have five PCBs for Bruce's Morse Tutor that I don't need so I'm offering them to the group. These are the Rev. 2A boards from the Gerber files that Bruce posted. I'm not looking to
|
By Mark M
·
|
|
Small updates 2 messages
The code for the ESP32 version of MorseTutor was just updated. The following features were added: - selectable start-up activity - selectable text and background colors The code for the STM32 version
The code for the ESP32 version of MorseTutor was just updated. The following features were added: - selectable start-up activity - selectable text and background colors The code for the STM32 version
|
By Bruce Hall
·
|
|
Bourns Encoder for Pocket Tutor 8 messages
In my last post, I had the incorrect number for the encoder. The correct p/n is: PEC11R-4215K-S0024-ND The JST battery connector and short female headers can be ordered from Adafruit. Ken WB2ART
In my last post, I had the incorrect number for the encoder. The correct p/n is: PEC11R-4215K-S0024-ND The JST battery connector and short female headers can be ordered from Adafruit. Ken WB2ART
|
By Ken WB2ART
·
|
|
Some notes on the Pocket Tutor build
The encoder Bruce used is oot of stock at Digikey. I used this one: ROTARY ENCODER MECHANICAL 24PPR PEC11R-4225F-S0024-ND It works fine. Since I did not want to use knobs, this one has a fluted shaf
The encoder Bruce used is oot of stock at Digikey. I used this one: ROTARY ENCODER MECHANICAL 24PPR PEC11R-4225F-S0024-ND It works fine. Since I did not want to use knobs, this one has a fluted shaf
|
By Ken WB2ART
·
|
|
Annotated pcb for Pocket Tutor 3 messages
When I built the Pocket Tutor, I had never worked with mcu's, audio chips and speakers. So I have attached an annotated pcb just to assist if your confused on part orientation, like I was. Ken WB2ART
When I built the Pocket Tutor, I had never worked with mcu's, audio chips and speakers. So I have attached an annotated pcb just to assist if your confused on part orientation, like I was. Ken WB2ART
|
By Ken WB2ART
·
|