hi all, last night i installed my dcs240 after some initial issues it's working ok now. The issues was it was shutting down imeadiatly with 4 beeps indicating a short. There was no short the shutdown

I want to address a problem I see. Not specifically this forum. But when someone asks a question, has a problem, etc. Why do the responses all seem to be: 1> over a beginners head. 2> involve spending

Hello all... I uploaded my Combination Layouts which together I have named the Betwixt And Between for I am also in an attempt to join them, using two Lionel Bascule Bridges, re-detailed to N Scale. T

No Apparently however - it is the other way around, with the ESU ECoS. https://www.youtube.com/watch?v=JJDefT8Udck I discovered that some DCC Decoders will not fully function even on their own brand (

I have an S gauge MTH F-3A/B set. It has the latest DCS version The DCS system leaves a lot to be desired in terms of operating on my NCE DCC system Layout! Many of the functions operate differently a

Can anyone tell me if you can control HO DCC using MTH PCS ?

Good afternoon, I was wondering if there was a way to adapt or modify this type of meter to use with DCC? I know there is the DCC Specialties RRamp Meter out there, but wondering if there was a way to

I have had my DCC set up for a couple of years. For the past year I I have been unable to do anything with it because of a health problem. I have the engines set up but can not remember how to put the

Allan's page for wiring older Shinohara turnouts has two methods for making them DCC friendly and how to subsequently wire them. There is also a short section that says you can try to use them unmodif

I have a problem with my track. I have PECO code 83 flex, Insulfrog turnouts and code 83 joiners. The joiners are giving me headaches. Not to forget split nails, cut finger tips, etc. I even try putti

This forum has existed for over 20 years. It has been a place where people could ask their questions and give answers without worrying about being attacked. This is not a chat group. It is a Q&A Forum

All, Please be mindful of the purpose of this QUESTION and ANSWER Forum. This is not a chatty group. I've had to delete several threads and mute topics in the past few weeks. Please be respectful of p

What are CV's and how do I program them ?

Scroll down to the Application 2 Example. https://dccwiki.com/Reverse_Sections I installed such a Wye with an Auto Reverser on my last modular layout with sections of Kato Unitrack, so it was easily s

To Lee Phillips For Digitrax you need a DT400 or 402 throttle. Plug it in to the loconet. Power on the system. Put the loco on the track. Press the PRGM button and look at the throttle display window.

Does anyone know if the Digitrax PR4 Interface will program an engine that is equipped with a keep alive device? My club is replacing a DCC Specialties interface because our experience is it will not

With all of the above said.... I am at present on a new concept of limiting abuses in my life which include N Scale Turnouts and so called Auto Reversers...along with other aspects of model railroadin

I have loaded a file named U_Turn=20190511a_1.pdf into the files section. I believe the gaps and the connection using a PSX-AR reverser will function as expected. One train at a time is the anticipate

I have been told that when gaping rails for isolation that the left rail gap should be in line with the right rail gap. However, the documentation for the reversers, PSX-AR say that they should be off

Greetings all! I just finished the the benchwork and beginning the track laying and wiring on my new layout. HO Scale, using NCE DCC (PH-PRO 5AMP). In the photo linked I've marked with red lines where