I have added a topic on the Peco 3-Way turnouts to my website. You can get to it, along with other recent topics, in the What's New section of my website at: http://www.wiringfordcc.com/wirefordcc_toc

Hey everyone. New to the group and wiring my first layout in DCC. In my yard district, I have wired two Peco SL-99 3 way turnouts with the toe end opposite each other and joining from the right side o

Looking at the photo's there should almost be a groups page dedicated to reverse loops! We're in the process of converting to DCC and in deliberations on how best to wire/block the loops we have. Ther

Several new topics have been added to the Wiring for DCC website. You can find them in the What's New section at: http://www.wiringfordcc.com/wirefordcc_toc.htm#a1 The new topics are: 1. DCC safe sold

Match So here is what I am doing now..... Cause I am not Steve Wozniak and can't put odd components together for Pong. https://www.modeltrainstuff.com/esu-50010-ecosboost-4-amp-ext-booster-mm-dcc-sx-m

Can anyone help me with this question? I'm re-entering the train scene but I'm asking if I am able to "mix-n-match" brands of power boosters. In other words, say I have an NCE DCC system. Can I add a

Larry Puckett had a item in the DCC Corner of the newest Model Railroader magazine about current being passed through the soldering iron tip which caused problems with some of his decoder installation

There's an article in the July 2019 Model Railroader reviewing several different DCC systems. Suggest reading thru it for some basics. In general, my impression form the article was No, but refer to t

hi all, last night i installed my dcs240 after some initial issues it's working ok now. The issues was it was shutting down imeadiatly with 4 beeps indicating a short. There was no short the shutdown

I want to address a problem I see. Not specifically this forum. But when someone asks a question, has a problem, etc. Why do the responses all seem to be: 1> over a beginners head. 2> involve spending

Hello all... I uploaded my Combination Layouts which together I have named the Betwixt And Between for I am also in an attempt to join them, using two Lionel Bascule Bridges, re-detailed to N Scale. T

No Apparently however - it is the other way around, with the ESU ECoS. https://www.youtube.com/watch?v=JJDefT8Udck I discovered that some DCC Decoders will not fully function even on their own brand (

I have an S gauge MTH F-3A/B set. It has the latest DCS version The DCS system leaves a lot to be desired in terms of operating on my NCE DCC system Layout! Many of the functions operate differently a

Can anyone tell me if you can control HO DCC using MTH PCS ?

Good afternoon, I was wondering if there was a way to adapt or modify this type of meter to use with DCC? I know there is the DCC Specialties RRamp Meter out there, but wondering if there was a way to

I have had my DCC set up for a couple of years. For the past year I I have been unable to do anything with it because of a health problem. I have the engines set up but can not remember how to put the

Allan's page for wiring older Shinohara turnouts has two methods for making them DCC friendly and how to subsequently wire them. There is also a short section that says you can try to use them unmodif

I have a problem with my track. I have PECO code 83 flex, Insulfrog turnouts and code 83 joiners. The joiners are giving me headaches. Not to forget split nails, cut finger tips, etc. I even try putti

This forum has existed for over 20 years. It has been a place where people could ask their questions and give answers without worrying about being attacked. This is not a chat group. It is a Q&A Forum

All, Please be mindful of the purpose of this QUESTION and ANSWER Forum. This is not a chatty group. I've had to delete several threads and mute topics in the past few weeks. Please be respectful of p