The problem with this decoder is that it is missing the 10 pin sound wiring harness. Back a few years ago I sent Digitrax a bad decoder for replacement and they very nicely sent this one to me which I

Hello - I have a Digitrax PM42 that will be used to handle 3 sections needing auto reverse function. All 3 sections are in close proximity to each other (4' or so) but about 15 feet from the booster.

Nick... I set myself out of this one for a time, wanting to read what Others had to say. === All in all ...I must agree...Run to DCC. ==== Except for one major exception..... >> N Scale and HO Scale

Scott - please send your emails in Plain Text.. Tks. -- Cheers. Doug Harris Cambridge, New Zealand

Nick, The more expensive NCE PowerPro system is much easier to interface with other add-on equipment as there are fewer restriction regarding computer interfacing for JMRI programming and/or 'cab'

Scott, Your vision of 'running great' usually changes when you go to DCC. Most of us want to operate at slower scale realistic speeds. This is where older locos may not work so well. Fitting a good

The Shinohara turnouts tend to be the power routing type where the points pick up and switch power to the all metal frog and frog rails. Some Pecos turnouts also work that way. Look for and digest the

What is AHM?

Thank you, very helpful. I think once I actually get hands on with it, I'll feel more comfortable with it. The good news is I haven't yet laid the yard track, so if I can get by with fewer blocks

I have a question when converting a new engine to DCC I made a new engine for me is it worth it if it runs great someone told me it was not worth the money just by another engine Cerni thing I need to

Hi Nick, I know your feeling. I was DC when my son bought a Bachmann DCC locomotive for me Christmas 2005 and man did I get bit. Anyway, don't let it over whelm you, take it one step at a time. If

Thank you for your guidance, especially with regard to blocks, NCE, etc.

hi Nick, What is 'best for your situation' is ultimately only decided by what it is you want to do. Not by a collection of DCC fans. Because if you ask them, they will tell you that DCC is the way to

Hello Nick, You seem to be making it more complicated than it needs to be. Run, don't walk, to DCC. The advantages of operating with DCC are great. Once you get started with DCC you will never look

https://xa.yimg.com/df/WiringForDCC/WAG-BS6.jpg?token=sn0Yze17naT3b5CdaMoEUHnwgt_fnX3VAAaTpcKUjnzJEw5tIznrZUcbtnTJLLYK7uYz4d5FGQBiHevsoT13MeYVwmchJ7MLloM&type=download

thank you for the help

Scott, Looking at your layout drawing... you have one continuous loop with only one place where trains could be reversed. Isolate the middle track located at the 'car lot' at both rails at both ends

https://joshuatorozoo.blogspot.com. here is were post it

Sorry. Yahoo strips off drawings and other non-text items from forum messages. Please post your sketch in the files or photos section or add a link to your drawing. DonV

Here is the lay out i am planing on doing is there anything i should change to mack wiring up DDC better