Note: groups.io will be down for maintenance this evening, starting at 2AM Pacific Time (9AM Thursday 10/17/2019 UTC), for up to two hours.
Re: [NCE-DCC] DC Power Supply Question
The biggest problem with using such a high current power supply is a serious Fire hazard. There is no forgivness with small wiring or improper wiring.
I agree you need to a slow blow fuse or a circuit breaker of about 5Amps right at the output of the power supply. That way any wiring problems will just pop the fuse or circuit breaker.
BTW: The DC output voltage is to low for the PowerPro to use anyway. You will not get full track voltage. It practice it takes about 19VDC to get the correct fully regulated output voltage at 5amps at the track terminals.
DCC Website & NMRA DCC Clinics: www.markgurries.com