Re: AUTO REVERSER CIRCUITS


Vollrath, Don <dvollrath@...>
 

The simplest method as Mark suggested, pending no multiple train/operator interference, is to isolate and wire up the wye turnout and stub track to be fixed polarity. Source that power directly from an existing mainline DCC circuit. Even then you might have to fiddle with the PSX-AR adjustments to ensure that it flips the AR track polarity to suit before any other circuit breakers trip. But the PSX-AR should be doing that now.

 

DonV

 

From: WiringForDCC@... [mailto:WiringForDCC@...]
Sent: Wednesday, July 22, 2015 12:37 PM
To: WiringForDCC@...
Subject: Re: [WiringForDCC] AUTO REVERSER CIRCUITS

 



Thanks Mark and Don.  I suspected there may be some interaction that was not desired.  I will look more closely at your suggestions before I move on with my project.

Ed Robinson


Join w4dccqa@groups.io to automatically receive all group messages.