Re: AUTO REVERSER CIRCUITS


Vollrath, Don <dvollrath@...>
 

Ed, If you use another PSX-AR you should be able to adjust the sensitivity/timing to ensure that the one feeding the wye stub & turnout flips first. Another option would be to forgo the PSX-AR for the wye stub and simply use the throwbar position of the turnout feeding the stub to determine the polarity via DPDT contacts of a Tortoise or a separate relay… or even a manual toggle switch… fed from the original reversing track power.

 

DonV

 

From: WiringForDCC@... [mailto:WiringForDCC@...]
Sent: Wednesday, July 22, 2015 6:18 AM
To: WiringForDCC@...
Subject: [WiringForDCC] AUTO REVERSER CIRCUITS

 



I have a long reverse loop on my layout that is managed by a PSX-AR.  I would like to add a wye module at the far end to service a quarry.  Can I just hookup another PSX-AR for that section or will a PSX-AR operating within another's district cause issues?

Ed Robinson

 




Join w4dccqa@groups.io to automatically receive all group messages.