Re: Buss Wiring Through Metal Studs

Vollrath, Don <dvollrath@...>
 

There should be no real issues as long as you use twisted pairs for the DCC busses and feeders and always run the wire pairs through the same hole in the metallic studs.

DonV

 

From: WiringForDCC@... [mailto:WiringForDCC@...]
Sent: Monday, November 17, 2014 3:23 PM
To: WiringForDCC@...
Subject: [WiringForDCC] Buss Wiring Through Metal Studs

 




I am building a new layout that will be raised and lowered by using a hoist system in my garage. To lower the weight of the benchwork I used metal studs. Can I drill holes in the metal studs and run the buss wires through the studs. Any help would greatly be appreciated.




Join w4dccqa@groups.io to automatically receive all group messages.