Re: Hot Snubber

Flash Gordon
 

If you really want to know... swap the whole terminator with a cool one and see if the heat goes with it. If it does scrap it. If it doesn't then you have a different problem.

Ed S

At 06:52 PM 3/7/2014, you wrote:



I measured the snubber and got infinite ohms.
The resistor is 100 ohm, 1/2 watt, and the capacitor is 0.1 uF, 50 WVDC.
All of my snubbers have these same values, and all of the others are cool to the touch.
Should I just replace the hot snubber?

Rich

Join w4dccqa@groups.io to automatically receive all group messages.