Re: Emergency stop button -- IMHO

Michael Looney

I have a question wouldn't it be easier to just pull the plug from the throttle doing that will stop everything.
Mike Looney

On 02/13/14, Glenn wrote:

Not to nit-pick but: Switch .75, box, .39,cover .25


I was not concerned about cost as much asavailability. These items can be found at any home center or hardware store.


The “Real” thing is hard tofind locally.


I did look at the eBay vendor cited otheritems and found this 5-pack


If I bought today I wouldn’t receivethem until between March 4th and 20th.




From: WiringForDCC@... [mailto:WiringForDCC@...] On Behalf Of Ed S
Sent: Wednesday, February 12, 201409:41
To: WiringForDCC@...
Subject: Re: [WiringForDCC]Emergency stop button -- IMHO



The Emergency stop switch I bought is probably about as expensive as the partsyou need.

It is already assembled, painted and labeled. It is obvious to what it is.Ready for surface mount ( there are punch-outs in the bottom) and it looks veryprofessional. All I have to do is stick a wire in it.

You could use several in series.

Ed S


At 05:48 AM 2/12/2014, you wrote:




           Economy light switches. Look for them in bulk boxes at the home centers. Theyare about a third the cost of the boxed variety.

           Junction boxes. I typically use the blue plastic 1x2.5x3.5 box. I drilltwo small holes about 3/8 in from the front and mount them with drywallscrews. The will take the standard switch or outlet.

           Cover plate. Get the typical face plate, rough sand it, definitely prime with asolvent based prime, and paint it what ever color you desire.

           Wire. Two-wire household wire is fine since it is a closed loop.



Join to automatically receive all group messages.