Re: Power Pax ?

terryintexas7@...
 

thanks
 

In a message dated 1/30/2014 4:32:16 P.M. Central Standard Time, pomilian@... writes:
 

Terry, connect a voltmeter across the program track rails; set it to around 15 volts AC.

When you issue a program track command (read or write) the voltmeter should show a voltage for a brief moment.

That only tells you that the device is turning on the track power and is talking to the command station, it doesn’t tell you if the DCC commands are correct.

Only other way is to place a loco on the program track and try to change/read it’s address or some CV’s.

Paul O

From: WiringForDCC@... [mailto:WiringForDCC@...] On Behalf Of terryintexas7@...
Sent: Thursday, January 30, 2014 12:34 PM
To: WiringForDCC@...
Subject: [WiringForDCC] Power Pax ?

  Is there a way to test a power pax booster to tell if it's working properly

Thanks

Terry

Join w4dccqa@groups.io to automatically receive all group messages.