Re: tortoise switch machines vs peco point motors

Carl
 

If you use a torque wire you only need a 0.050" hole. And if you miss you can try again and don't have a 0.375" hole to fill in.

On 1/9/2014 7:07 PM, Jim Gifford wrote:
 

Hi Bernie

 

I should be made clear that installing Peco switch motors calls for a very large hole, a rectangular one at that, under the track, whereas a Tortoise only needs an easy-to-drill ~.5” hole. 

 

Have you thought of using the adaptor base – you can use a ~0.375” hole.  This is what I use.


Join w4dccqa@groups.io to automatically receive all group messages.