Re: x overs & DCC

B WRAGG <joandbrianwragg@...>
 

hi mark obviously you want some assistance but you dont want to pay for it.

if you dont want to pay for it.
then you will have to do it yourself.

KINDEST REGARDS

bRIAN wRAGG



________________________________
From: B WRAGG <joandbrianwragg@...>
To: "WiringForDCC@..." <WiringForDCC@...>
Sent: Wednesday, 7 November 2012, 20:33
Subject: Re: [WiringForDCC] x overs & DCC


 
hI MARK.  Brian HERE/

OBVIOUSLY YOU WANT SOME ASSISTANCE.

IF YOU WOULD LIKE TO PAY MY AIR FARE I WILL CONE TO YOUR HOUSE AND SET IT UP FOR YOU

OR YOU CAN SEND ME AN UPDATE FOR MY CONTROLLER IT IS AN NCE.

kINDEST REGARDS

Brian WRAGG

________________________________
From: Mark Gurries <gurriesm@...>
To: WiringForDCC@...
Sent: Wednesday, 7 November 2012, 18:15
Subject: Re: [WiringForDCC] x overs & DCC


 
On 11/6/12 at 10:12 AM, geoleob@... (geoleob) wrote:

I have recently installed a Walthers(Shinohara) xover and now I have a reversing loop but can't
figure out how to wire it. I wish to use DP/DT switches to conteol the polarity. Any help will be
greatly appreciated.
Sound like you have a ballon track setup.

http://www.wiringfordcc.com/track_2.htm#a43

You not limited to the suggested ARSC reversing controller.

Best Regards,

Mark Gurries
Electrical Engineer
DCC Website & NMRA DCC Clinics: www.markgurries.com

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Join w4dccqa@groups.io to automatically receive all group messages.