Note: groups.io will be down for maintenance this evening, starting at 11pm Pacific Time (6am Tuesday 8/3/2020 UTC), for up to two hours.
Re: Programming Track Booster
toggle quoted messageShow quoted text
I have programmed several (7) BLI Blueline locomotives WITHOUT in sort of inline booster. Program the sound decoder before installing the motor decoder and lock it....I setup the motor decoder before installing it using my decoder tester, once it's working correctly and locked, I put it in the loco.
Phil Euper in SC
----- Original Message -----
From: "acmee001" <acmee001@...>
Sent: Tuesday, May 25, 2010 3:17 AM
Subject: [WiringForDCC] Re: Programming Track Booster
Thanks Doug - appreciated
what you suggest seems logical so I might pull it out or install a DPDT and get around it that way. Thankyou once again. Stu
--- In WiringForDCC@..., "Doug Stuard" <dstuard@...> wrote:
I'm not familiar with the booster you are using, but it may be that, while the booster provides the necessary oomph TO the programming track, it does not provide the ability for the command station to detect what is on the far side of the booster. Like any amplifier, it's a one-way device unless a separate reverse path is explicitly provided.
But I could be wrong...
--- In WiringForDCC@..., "acmee001" <acmee001@> wrote:
I have recently installed a a Soundtrax PTB-100 programming booster within my Digitrax setup because I thought it would assist with programming Blueline BLI. While the item functions as per the manual, I note that the JMRI program that I utilise to program locos, is coming up with the message that it is unable to identify the decoder.
This is happening with all decoders including the common - ones which normally would not present an issue to JMRI and the system.
Before I pull it out - has anyone experienced this and from a wiring perspective, have I created incompatibility issues with loadings and data handling? I use the Digitrax MS100 at about 16k baud as the interface and wondered whether there is a timing issue although this isn't mentioned in error codes.
I do have a loco buffer ready to install but not sure which way to proceed now.
thanks once again Stu
http://www.WiringForDCC.comYahoo! Groups Links
Join firstname.lastname@example.org to automatically receive all group messages.