Re: Feeder line isues


Thanks for the advice DonV. Will be sure to make good solid connections.

On Jan 24, 2020, at 5:58 AM, Don Vollrath <donevol43@...> wrote:

´╗┐It is the overall in series resistance of the current path that limits the peak flow of current necessary to operate the AR unit. Twisted then soldered Wire to wire connections will provide a minimum of overall resistance to the intended current path. So make your own wire size transition using a short piece of 20/22 Awg soldered to the longer length of 14awg feeder wire at each end. Good alternatives include a solid barrel crimp splice.

Join to automatically receive all group messages.