Re: Wiring the LEDs in a DC wired loco for DCC

dennisedgar7
 

Paul,

 

Thanks for the email.

 

I have uploaded a sketch of the wiring.

 

There is no circuit board involved in the wiring.

 

The red LEDs in the rear (long hood) come on when the loco is moving forward and the white LEDs in the rear (long hood) are off and the white LEDs in the front are on.

When the loco is reversing then the red LEDs in the front (short hood) are on and the white LEDs off.

 

Dennis G

 

From: w4dccqa@groups.io [mailto:w4dccqa@groups.io] On Behalf Of Paul O
Sent: 02 May 2019 02:54 AM
To: w4dccqa@groups.io
Subject: Re: [w4dccqa] Wiring the LEDs in a DC wired loco for DCC

 

 Dennis, you’ll have to give us a lot more information in order for us to help.

Is there any circuitboard involved in the wiring? Do the red LEDs only come on in reverse?
If you can, draw out the wiring on the sheet of paper, create a JPEG or some other form and upload it to the Files or photo section depending on what format you upload.

Paul O

Join w4dccqa@groups.io to automatically receive all group messages.