toggle quoted messageShow quoted text
I got one of those and it was totally worthless.
Just my .02
Business Information Systems, Inc.
P.O. Box 160396
Boiling Springs, SC 29316
firstname.lastname@example.org <email@example.com> On Behalf Of
Kurt Konrath via Groups.IoSent:
Wednesday, May 1, 2019 3:41 PMTo:
Re: [w4dccqa] Rail joiners & PECO
Atlas Model RR co sells a tool specifically for putting on rail joiners. Cat 150-401. Many places to get it from.
Three sided tool for code 100, 83 and I forget the other one.
Designed to allow you slip joiner on tool point and it opens slightly and gives you a way to push on rail without fingers in the way of sharp items!
On May 1, 2019, at 11:05 AM, Bob Macionis <macionis@...> wrote:
I sympathize, and have multiple finger tip scars from those nasty joiners. Using small pliers designed for this very task will avoid the blood. But those joiners are too tight! I have given up using them (except on code 70 track) and now use Atlas universal joiners. Yes, they’re much bigger, and loose, but they go on easily, and I solder all joints and paint the rails so they look ok.
Sent: Wednesday, May 01, 2019 11:11 AM
Subject: [w4dccqa] Rail joiners & PECO
I have a problem with my track. I have PECO code 83 flex, Insulfrog turnouts and code 83 joiners. The joiners are giving me headaches. Not to forget split nails, cut finger tips, etc. I even try putting a joiner on a spare piece of rail to then put onto the track. But those joiners are way too tight. Filing the rails, top, bottom and top of the base - very lightly, just enough to smooth and remove any burrs. Can't seem to figure out how to spread the end of the joiner a bit, just to get it started. The darn things just don't like me. LOL Positive help requested and appreciated.
Morgan Bilbo, new to DCC
Message Security: Check Authenticity