Re: BD20

Don Vollrath

On Thu, Mar 21, 2019 at 07:17 AM, Richard_vanRaay wrote:
I have changed the bd20 but it still lights on the AIU.
When I disconnect the bd20 the led turns off.
Try a different input channel on the AIU. If that doesn't work... The only thing left is current leakage as seen by the BD20 on/from the track. Verify that the rail gaps are open. Look for debris on the track. Look for current leakage between the rails due to moisture in the ballast. Uninsulated wiring?

Join to automatically receive all group messages.