Re: DCC voltage on track
toggle quoted messageShow quoted text
OK, I am beginning to isolate the problem. I disconnected the suspect power district from the PM42 and now I get a voltage reading on the remaining 3 (11.6 volts).
So, tomorrow I begin the search for the problem.
Just FYI, all switches are Peco Electrofrog and the switches do no power routing.
Thanks to all for the assist.
Business Information Systems, Inc.
P.O. Box 160396
Boiling Springs, SC 29316
From: email@example.com <firstname.lastname@example.org> On Behalf Of vincent marino
That's a good question. I had the foresight to put all the turnouts (14 of them) on one power district. My shorts we're isolated to that district. Specifically I track powered each turnout, occasionally because of proximity 2 turnouts shared a powered rail joiner. All my frogs are powered and frankly that was the issue until I synced the engines.
On Sat, Feb 16, 2019, 6:23 PM AD <bklyns_baseball_club@... wrote:
ExchangeDefender Message Security: Check Authenticity